Kenwood KDC-PS9018R - page 29

Each time the 38 button is pressed, the characters to be

entered change as listed below.

Press the DISC+or DISC–button to display the desired

character.

Characters that can be displayed are as follows.

Continue steps 3 and 4 until all the characters are chosen for

the name.

You can enter up to 12 characters for each name.

Press the NAME button.

The disc name is stored and the disc name preset mode is

canceled.

If you make no entry in a 10-second period, the name will be

stored with the characters input so far.

•The number of discs whose names can be stored will differ

depending on the disc changer that is connected. Please see

your disc changer manual for details.

Up to 30 CDs can be registered with this unit.

•Discs are identified by their total length and number of tracks. If

another disc happens to have the same specifications as one

that you have already stored a name for, the name will be

displayed for it, too.

•If you want to change the name of a disc, repeat steps 1 and 2

to display the name, and then repeat steps 3 and 4 to input the

changes.

•Pressing the reset button erases the disc names stored in this

unit, but does not erase the names stored in a disc changer.

NOTE

6

NOTE

5

Alphabet (upper case): A ~ Z

Alphabet (lower case): a ~ z

Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ]

Special characters: áàéèíìóòúùÑÇ®ß‹ﬂ

âäêëîïôöûüñç©Æ›ﬁ

4

— 29 —

KDC-PS9018R(M_E)_r3 2003.06.13 03:04 PM Page 29

Contents

Main Contents Safety precautions...................3 Handling Compact discs...........5 General features Audio control features Tuner features RDS features CLASS 1 LASER PRODUCT Safety precautions NOTE Cleaning the Faceplate Terminals Reset button Safety precautions Cleaning the CD Slot Lens Fogging Page Handling Compact discs Do Not Load CD Accessories Removing the CD Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled Side Volume Power Loudness Attenuator Switching Modes Switching Full-Screen Display Faceplate Angle Adjustment Switching the Lower Part Display Switching the Upper Part Display Page Removing the Faceplate Forced Closing System Q Non-Fading Output Speaker & Woofer setting TEL Mute Audio Control Setting Page Phase for Non-Fading Output Low-pass Filter Frequency for Non-Fading Output Non-Fading Level High-pass Filter Frequency for Front Output High-pass Filter Frequency for Rear Output Tuner features Volume Offset Station Preset Memory Tuning Preset station seek with Program service name Tuner features Alarm RDS (Radio Data System) Enhanced Other Network Program Type (PTY) Function Traffic Information Function Presetting Volume for Traffic Information/News Page Page Playing CDs Disc Search (Function of disc changers) Playing Other Disc mode Track Search Fast Forwarding and Reversing Disc Play Random Play Track Scan Track / Disc Repeat Presetting Disc Names (DNPS) Magazine Random Play (Function of disc changers) Text Scroll Page Disc Name Preset Play (DNPP) Menu System 7 Security Code <In Stand by mode> Page Automatic Time Adjustment Memo Mode 8 7 Page External Amp Control Time setting for removing the faceplate System Q Built-in Amp Mute Control <In Stand by mode> Dual Zone System <In AUX mode> Selecting Tuning Mode <In Tuner mode> Local Seek Function <In Tuner mode> News Bulletin Function with PTY News Timeout Setting Restricting RDS Region (Region Restrict Function) Auto Memory Entry <In Tuner mode> AF (Alternative Frequency) Function Basic Operations of remote Text Scroll + TUNE +//TRACK + OK SRC Basic operations Basic Operations of remote CD/External disc control features Tuner features Page Connecting Wires to Terminals Page Page Installing Radio Bracket in Japanese-made Cars (J-Cars) Installation (Japanese-cars) Page Page CD/External disc control mode If the following situations, consult your nearest service center: