Kenwood KDC-PS9018R

— 45 —

Removing the Unit

Removing the hard rubber frame

■

Insert the removal tool into the indentations in the hard rubber

frame, and pull it gently until the lock is released.

Accessory0

Removal tool

Accessory4

Removing the Unit

■

Push upward the removal

tool toward the top, and

pull out the unit halfway

while pressing towards the

inside.

Pull the unit all the way out

with your hands, being

careful not to drop it.

Be careful to avoid injury from the catch pins on the removal

tool.

2CAUTION

Catch facing up

Refer to the section “Removing the hard rubber frame” and

then remove the hard rubber frame.

Remove the Hex-head screw with integral washer (M4×8) on

the back panel.

Insert the two removal tools deeply into the slots on each

side, as shown.

Accessory3

Removal tool

KDC-PS9018R(M_E)_r3 2003.06.13 03:04 PM Page 45

Contents

Main Contents Safety precautions...................3 Handling Compact discs...........5 General features Audio control features Tuner features RDS features CLASS 1 LASER PRODUCT Safety precautions NOTE Cleaning the Faceplate Terminals Reset button Safety precautions Cleaning the CD Slot Lens Fogging Page Handling Compact discs Do Not Load CD Accessories Removing the CD Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled Side Volume Power Loudness Attenuator Switching Modes Switching Full-Screen Display Faceplate Angle Adjustment Switching the Lower Part Display Switching the Upper Part Display Page Removing the Faceplate Forced Closing System Q Non-Fading Output Speaker & Woofer setting TEL Mute Audio Control Setting Page Phase for Non-Fading Output Low-pass Filter Frequency for Non-Fading Output Non-Fading Level High-pass Filter Frequency for Front Output High-pass Filter Frequency for Rear Output Tuner features Volume Offset Station Preset Memory Tuning Preset station seek with Program service name Tuner features Alarm RDS (Radio Data System) Enhanced Other Network Program Type (PTY) Function Traffic Information Function Presetting Volume for Traffic Information/News Page Page Playing CDs Disc Search (Function of disc changers) Playing Other Disc mode Track Search Fast Forwarding and Reversing Disc Play Random Play Track Scan Track / Disc Repeat Presetting Disc Names (DNPS) Magazine Random Play (Function of disc changers) Text Scroll Page Disc Name Preset Play (DNPP) Menu System 7 Security Code <In Stand by mode> Page Automatic Time Adjustment Memo Mode 8 7 Page External Amp Control Time setting for removing the faceplate System Q Built-in Amp Mute Control <In Stand by mode> Dual Zone System <In AUX mode> Selecting Tuning Mode <In Tuner mode> Local Seek Function <In Tuner mode> News Bulletin Function with PTY News Timeout Setting Restricting RDS Region (Region Restrict Function) Auto Memory Entry <In Tuner mode> AF (Alternative Frequency) Function Basic Operations of remote Text Scroll + TUNE +//TRACK + OK SRC Basic operations Basic Operations of remote CD/External disc control features Tuner features Page Connecting Wires to Terminals Page Page Installing Radio Bracket in Japanese-made Cars (J-Cars) Installation (Japanese-cars) Page Page CD/External disc control mode If the following situations, consult your nearest service center: