Kenwood KDC-PS9018R Handling Compact discs

— 6 —

English

Do Not Load CD Accessories

Do not use commercially available CD

accessories that can be loaded into the CD

slot, such as stabilizers, protective sheets,

or CD cleaning discs, since they can cause

the unit to malfunction.

Removing the CD

Only remove the CD from the machine in a

horizontal direction, holding it flat. You may

damage the surface of the CD if you try

pulling it down as it ejects.

Do Not Use Special Shape CDs

•Be sure to use round shape CDs only for

this unit and do not use any special shape

CDs. Use of special shape CDs may cause

the unit to malfunction.

•Be sure to use CDs with disc mark

only for this unit.

•CD-Rs and CD-RWs which have not

undergone finalization processing cannot be

played. (For more information on finalization

processing, refer to the manual for your CD-

R/CD-RW writing software or CD-R/CD-RW

recorder.) Additionally, depending on the

recording status, it may prove impossible to

play certain CDs recorded on CD-R or CD-

RW.

Do Not Use CDs with Sticker on the

Labeled Side

Do not use the CD with the label sticker

stuck on it.

Using such a CD may cause the CD to be

deformed and the sticker to peel off,

resulting in malfunction of the unit.

Handling Compact discs

KDC-PS9018R(M_E)_r3 2003.06.13 03:04 PM Page 6

Contents

Main Contents Safety precautions...................3 Handling Compact discs...........5 General features Audio control features Tuner features RDS features CLASS 1 LASER PRODUCT Safety precautions NOTE Cleaning the Faceplate Terminals Reset button Safety precautions Cleaning the CD Slot Lens Fogging Page Handling Compact discs Do Not Load CD Accessories Removing the CD Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled Side Volume Power Loudness Attenuator Switching Modes Switching Full-Screen Display Faceplate Angle Adjustment Switching the Lower Part Display Switching the Upper Part Display Page Removing the Faceplate Forced Closing System Q Non-Fading Output Speaker & Woofer setting TEL Mute Audio Control Setting Page Phase for Non-Fading Output Low-pass Filter Frequency for Non-Fading Output Non-Fading Level High-pass Filter Frequency for Front Output High-pass Filter Frequency for Rear Output Tuner features Volume Offset Station Preset Memory Tuning Preset station seek with Program service name Tuner features Alarm RDS (Radio Data System) Enhanced Other Network Program Type (PTY) Function Traffic Information Function Presetting Volume for Traffic Information/News Page Page Playing CDs Disc Search (Function of disc changers) Playing Other Disc mode Track Search Fast Forwarding and Reversing Disc Play Random Play Track Scan Track / Disc Repeat Presetting Disc Names (DNPS) Magazine Random Play (Function of disc changers) Text Scroll Page Disc Name Preset Play (DNPP) Menu System 7 Security Code <In Stand by mode> Page Automatic Time Adjustment Memo Mode 8 7 Page External Amp Control Time setting for removing the faceplate System Q Built-in Amp Mute Control <In Stand by mode> Dual Zone System <In AUX mode> Selecting Tuning Mode <In Tuner mode> Local Seek Function <In Tuner mode> News Bulletin Function with PTY News Timeout Setting Restricting RDS Region (Region Restrict Function) Auto Memory Entry <In Tuner mode> AF (Alternative Frequency) Function Basic Operations of remote Text Scroll + TUNE +//TRACK + OK SRC Basic operations Basic Operations of remote CD/External disc control features Tuner features Page Connecting Wires to Terminals Page Page Installing Radio Bracket in Japanese-made Cars (J-Cars) Installation (Japanese-cars) Page Page CD/External disc control mode If the following situations, consult your nearest service center: