Tuner Operation

Station Preset Memory

Putting a station in the memory.

1Select the frequency to put in the memory Push the Control knob towards right or left.

2Enter Preset Memory mode Press the [] button.3Preset the station

Turn the Control knob to select preset number (“P1” – “P6”), and then press the [ENTER] button for at least 2 seconds.

Cancelling the Preset Memory mode Press the [] button.

Preset Tuning

Recalling the stations in the memory.

1Enter Preset Tuning mode Press the [] button.2Recall the station

Turn the Control knob to select recall number (“P1” – “P6”), and then press the [ENTER].

Cancelling Preset TuningPress the [] button.

Function of remote control

Direct Access Tuning

Entering the frequency and tuning.

1Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote control.

“– – – –” is displayed.

2Enter the frequency

Press the number buttons on the remote control.

Example:

Desired frequency

 

Press button

92.1 MHz (FM)

 

[9], [2], [1]

810 kHz (AM)

[8], [1], [0]

3Search the frequency

Press the [4] or [¢] button on the remote control.

Cancelling Direct Music Search

Press the [ ] button on the remote control.

⁄

•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

Frequency Step Setting

Changing the tuning frequency step.

The original setting is FM band 50 kHz, and AM band 9 kHz.

1Turn the power OFFPress the [SRC] button for at least 1 second.2Switch the frequency step

While pressing the [FAVORITE] button and [ENTER] button, press the [SRC] button. Release your fingers from the button after the display appears.

The frequency step changes to FM band 200 kHz, and AM band 10 kHz.

⁄

•When the same operation is repeated, the frequency step returns to the original setting.

•When the frequency step is changed, the frequencies in the memory are deleted.

English 13