Displaying the Firmware Version

Display the version of the firmware of this unit.

1Enter Bluetooth mode

KDC-U7046BT KDC-U7046BTL

Press the [

] button.

KDC-U6046 KDC-U6046L

Press the [FNC] button for at least 1 second.

“BT MODE” is displayed.

2Enter Function setting mode Press the [FNC] button.

3Select Bluetooth Firmware update mode The item can be selected and determined as follows.

”Settings” ➜ “Detailed Settings” ➜ “BT F/WUpdate”

To select the item, turn the Control knob. To determine the item, press the [ENTER] button. The firmware version appears.

4Exit Bluetooth mode Press the [SRC] button.

⁄

•For how to update the firmware, access our web site. www.kenwood.com/bt/information/

Function of KCA-BT200 (Optional Accessory)

Adding a voice dialing command

Add a voice tag to the phonebook for voice dialing. You can register up to 35 voice tags.

1Enter Bluetooth mode

Press the [FNC] button for at least 1 second. “BT MODE” is displayed.

2Enter Function setting mode Press the [FNC] button.

3Select Phonebook name edit mode

The item can be selected and determined as follows.

”Settings” ➜ “Voice Tag” ➜ “PB Name Edit”

To select the item, turn the Control knob. To determine the item, press the [ENTER] button.

4Search for the name to registerTurn the Control knob to select name, and then press the [ENTER] button.

If a voice tag has already been registered for a name, “*” is displayed before the name.

5Select a mode

Turn the Control knob.

Display

 

Operation

“Register”

 

Register a voice tag.

“Check”*

 

Play a voice tag.

“Delete”*

 

Delete a voice tag.

*Displayed only when a name for which a voice tag has been registered is selected.

Selecting “Register” (Regist)6Register a voice tag (first)

Press the [ENTER] button. When you hear a beep, speak the voice tag within 2 seconds.

7Confirm the voice tag (second)

Press the [ENTER] button. When you hear a beep, speak the same voice tag again within 2 seconds.

“Completed” is displayed.

8Exit Function setting mode

Press the [ ] button for at least 1 second. Return to step 2. You can register another voice tag continuously.

⁄

•If your voice cannot be recognized, a message is displayed. (Refer to <Troubleshooting Guide> page 36)

Pressing the [ENTER] button allows you to retry voice input.

Selecting “Check” (Play)6Press the [ENTER] button.

Play the registered voice and return to step 2.

Selecting “Delete” (Delete)6Delete a voice tag

Press the [ENTER] button.

7Turn the Control knob to select “YES”, and then press the [ENTER] button.Exit Bluetooth mode

Press the [SRC] button.

English 29