Function setting

47Device Regist: “Device Regist.”

Register a Bluetooth device (pairing). Refer to <Registering Bluetooth device> (page 26).

48Special Device Regist: “SPCL DVC Select” Allow registration of a special device that cannot be registered normally. Refer to <Registering Special Bluetooth device> (page 26).

49Device Delete: “Device Delete”

Cancel registration of the Bluetooth device. Refer to <Deleting a Registered Bluetooth device> (page 28).

50PIN Code Edit: “PIN Code Edit”

Specify the PIN code required when registering this unit using the Bluetooth device. Refer to <Registering PIN Code> (page 27).

51Setting the Time Interval for Automatic Answer: “Auto Answer” ➤ ”OFF”, “0SEC” – “8SEC”

– “99SEC”

This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer.

“OFF” : Does not answer the phone call automatically.

“0” : Automatically answers the phone call at once.

“1s” – “99s” : Automatically answers the phone call after lapse of 1 – 99 seconds.

52Speaker Select: “Bluetooth HF/Audio” ➤ “Front”, ”All”

You can specify output speakers for hands-free voice communication and Bluetooth audio sound. “Front” : Outputs sound from the front speakers. “All” : Outputs sound from the front and rear

speakers.

53Setting the Beep of the Incoming Call: “Call Beep” ➤ “ON”, ”OFF”

You can output a beep from the speaker when a call comes in.

“ON” : Beep is heard.

“OFF” : Beep is canceled.

54BT F/W Update: “BT F/W Update”

Displays the firmware version and update the firmware. Refer to <Displaying the Firmware Version> (page 29).

55MIC Gain: “MIC Gain” ➤ “-3” – ”0” – “+3”

Adjusts the sensitivity of the built-in microphone for a telephone call. Adjust the voice of caller. Setting to “+” increases the voice volume. Function of the KDC-U7046BT/ KDC-U7046BTL

56Noise Cancel: “NR Level” ➤ “-3” – ”0” – “+3” Reduces the noises generated by surrounding environment without changing the built-in microphone volume. Adjust the voice of caller when it is not clear. Setting to “+” increases the noise reduction.

Function of the KDC-U7046BT/ KDC-U7046BTL.

57Echo Cancel Level: “Echo Cancel” ➤ “-2” – ”0”

– “+2”

Sets the echo cancellation level.

Function of the KDC-U7046BT/ KDC-U7046BTL.

58MIC Select: “MIC Select” ➤ “Builtin”, ”External” Determines whether the built-in or external microphone is to be used when the receiver incorporates a microphone.

Builtin: Use the built-in microphone.

External: Use the external microphone. Function of the KDC-U7046BT/ KDC-U7046BTL.

⁄

•The Bluetooth Function setting items can be set while in the Bluetooth mode without selecting the Function setting mode.

1.Press the [ ] button ( KDC-U7046BT KDC-U7046BTL )/ [FNC] button for at least 1 second ( KDC-U6046 KDC-U6046L ) to enter the Bluetooth mode.

2.Turn the Control knob to select “BT Setting”, and then press the [ENTER] button.

3.Turn the Control knob to select desired item, and then press the [ENTER] button.

4.Turn the Control knob to select value, and then press the [ENTER] button.

18 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L