Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)

Bluetooth Setup

Function of KCA-BT200 (Optional Accessory)

Setting a Voice Command for

Category

Add a voice tag to the phone number category (type) for voice calling.

1Enter Bluetooth mode

Press the [FNC] button for at least 1 second. “BT MODE” is displayed.

2Enter Function setting mode Press the [FNC] button.

3Select Phone Number type edit mode

The item can be selected and determined as follows.

”Settings” ➜ “Voice Tag” ➜ “PN Type Edit”

To select the item, turn the Control knob. To determine the item, press the [ENTER] button.

4Enter Phone Number type edit mode Press the [ENTER] button.

5Select the category (type) you wish to set Turn the Control knob to select desired category name, and then press the [ENTER] button.

“General”/ “Home”/ “Office”/ “Mobile”/ “Other”

6Select a mode

Turn the Control knob.

Display

“Register”

“Check”*

“Delete”*

Operation

Register a voice tag.

Play a voice tag.

Delete a voice tag.

*Displayed only when a name for which a voice tag has been registered is selected.

7Register the category (type) by performing steps 6 to 8 in <Adding a voice dialing command> (page 29).

8Exit Bluetooth mode Press the [SRC] button.

⁄

•Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command.

30 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L