50 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL English | 51

Listen to the Digital Radio

10-8. Replay

You can replay last about 7 minutes (audio bit rate:
128 kbps) of current service.
1 Press [R]
“Replay Mode” appears and enters the Replay
mode.
During Replay, you can perform the following
operations:
Operation type Operation
Pause and play Press and hold [1/6].
Forward or backward 15 seconds Press [E] or [F].
Fast forward or Fast backward Press and hold [E] or [F].
Exiting from the Replay mode.
Press [R]
The on-air song is received.

10-9. Digital Radio setting

You can set the Digital Radio related items.
1 Press [Control] knob.
Enters the Function setting mode.
2 Select “Settings” using [Control] knob.
3 Select a Digital Radio setting item using
[Control] knob.
Display Description
“Seek Mode” Sets the Digital Radio seek mode.
Refer to <10-1. Listening to the Digital
Radio> (page 46)
“DAB Priority” When this setting item is set to ON, the
station will automatically switch to a Radio
Data System Broadcast with the same radio
program in event the reception for Digital
Radio becomes poor.
In the same manner, the station will
automatically switch to a Digital Radio
Broadcast with the same radio program in
event the reception for Radio Data System
becomes poor. (If the same program is not
being broadcasted on either, it will not switch
between Digital Radio and Radio Data System).
“ON” / “OFF”
“DAB List Update” Sets updating method for “DAB List Update”
Service list information.
“ON”: Automatically updates the service list
when ACC is turned ON.
“OFF”: Updates the service list only when [R]
is pressed and held.
“PTY Watch” When a broadcast with program type set to
“PTY Watch” starts with the ensemble currently
being received, the reception for broadcast
automatically switches to that program type.
Refer to <10-6. PTY (Program Type)> (page
48)
“Watch OFF” / program type (29 types)
“TI” Switches to the traffic information
automatically when the traffic bulletin starts.
“ON” / “OFF”
“DAB Blend” Prevents audio break when switching from
Digital Radio to Analog Radio.
“ON” / “OFF”
(Colored text: Factory setting)
4 Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].

10-10. Digital Radio initial settings

You can configure initial settings of Digital Radio.
1 Press [SRC] to select a Standby (“STANDBY”).
Refer to <10-9. Digital Radio setting> (page 50).
2 Press [Control] knob.
Enters the Function setting mode.
3 Select “Initial Settings” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
4 Select a Digital Radio initial setting item using
[Control] knob.
Display Description
“DAB L-Band” Allows switching to L band when set to “ON”.
“ON” / “OFF”
“DAB Antenna Power” Sets power supply to the Digital Radio
antenna. Set to “ON” when the Digital Radio
antenna in use is equipped with a booster.
“ON” / “OFF”
(Colored text: Factory setting)
5 Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].