Kenwood KDC-U7056DAB DSP settings, Audio control, Manual equalizer control, Car type selection

4. DSP settings

4-1. Audio control

You can adjust the audio control items.

1Press [SRC] to select a source other than Standby (“STANDBY”).

Refer to <Source selection> (page 10).

2Press [Control] knob.

Enters the Function setting mode.

3Select “Audio Control” using [Control] knob. For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).

4Select a audio control item using [Control] knob.

Display		Overview
“SubWoofer Level”		You can set subwoofer level.
		“–15” — “0” — “+15”
“Preset Equalizer”[1][4]		Select from among preset equalizer curves
		to set the sound quality.
		“User”[2]/ “Natural”/ “Rock”/ “Pops”/
		“Easy”/ “Top 40”/ “Jazz”/ “Powerful”/
		“iPod”(During iPod source only)
“Manual Equalizer””[1][4]		Set the equalizer curve manually.
		Refer to <4-2. Manual equalizer control>
		(page 13).
“Pro Setup”
	“DSP Set”[7]	Turn on/off the DSP function.
		“Bypass”: Disables the DSP function.
		“Through”: Enables the DSP function.

		“Sound Realizer”	Virtually makes the sound more realistic
			using the DSP.
			“OFF”/ “Level1”/ “Level2”/ “Level3”
		“Sound Elevation”	Virtually raises the sound field using
			the DSP.
			“OFF”/ “Low”/ “Middle”/ “High”
	“Volume offset”		Sets each source’s volume as a difference
			from the basic volume.
			“–8” — “0” (AUX: “–8”— “+8”)
	“Rear Mute”[6]		Sets the Rear channel Mute.
			“ON”/ “OFF”
	“SubWoofer Mute”		Sets the Subwoofer Mute.
			“ON”/ “OFF”
	“Audio Preset”		You can register the values set the Audio
			control items.
			Refer to <4-10. DSP preset> (page
			18), <4-11. DSP preset recall> (page
			19).
“Bass Boost”[4]			Sets the Bass Boost level in 3 steps.
			“OFF”/ “Level1”/ “Level2”/ “Level3”
“Loudness”[4]			Makes the sounds at high and low
			frequencies louder.
			“OFF”/ “Low”/ “High”
“Balance”			Adjusts left/right speaker balance.
			“Left15” — “0” — “Right15”
“Fader”[6]			Adjusts front/rear speaker balance.
			“Rear15” — “0” — “Front15”

(Colored text: Factory setting)

[1] You can select for each source.

[2] “User”: The Equalizer curve set in the section <4-2.

Manual equalizer control> (page 13) is recalled.

[3] This function is not effective for the Tuner and Digital

4-2. Manual equalizer control

You can adjust the equalizer curve manually.

1Press [SRC] to select a source other than Standby (“STANDBY”).

Refer to <Source selection> (page 10).

2Press [Control] knob.

Enters the Function setting mode.

3Select “Audio Control” > “Manual Equalizer” using [Control] knob.

For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).

4Select a equalizer control item using [Control] knob.

Display	Description	Range
“Gain”	Adjust the gain of each band.	-9 – 0 – +9 dB
“Q Factor”	Adjust Q of each band.	1.35/ 1.50/ 2.00
“Bass EXT”	Adjust the gain of lower	“OFF”/ “ON”
	frequencies than 62.5 Hz to the
	level equivalent to 62.5 Hz.

(Colored text: Factory setting)

When “Bass EXT” and “Q Factor” are selected, skip step 5.

5 Select a Band using [Control] knob.

“BAND1”; 62.5 Hz, “BAND2”; 100 Hz,

“BAND3”; 160 Hz, “BAND4”; 250 Hz,

“BAND5”; 400 Hz, “BAND6”; 630 Hz,

4-3. Car type selection

You can compensate the delay of the sound arrival time by selecting your environment from the car types.

1Press [SRC] to select a source other than Standby (“STANDBY”).

Refer to <Source selection> (page 10).

2Press [Control] knob.

Enters the Function setting mode.

3Select “Audio Control” > “Pro Setup” > “Car Type” using [Control] knob.

For how to use [Control] knob, refer to <3-3. How to select the item> (page 9).

4Select a car type using [Control] knob.

Display	Car type
“OFF”	Not compensating.
“Compact”	Compact car
“Full Size Car”	Full size car
“Wagon”	Station wagon
“Minivan”	Minivan
“SUV”	Sport-utility vehicle
“Minivan (Long)”	Long Minivan

Exiting from the Function setting mode Press and hold [1/6].

To set the delay time finely

“Car Type”[4]

“Speaker Setting”[4]

“X’Over”[4]

“DTA Settings”[4]

To get clear sound, set the sound environment according to the location and size of physically installed speakers with reference to the followings:

<4-3. Car type selection> (page 13) <4-4. Speaker setting> (page 14) <4-5. X’Over setting> (page 15) <4-6. Listening position setting> (page 16)

<4-7. Delay time control> (page 16) <4-8. Channel level fine adjustments> (page 17)

	radio source.
[4]	Displayed only when “DSP Set” is set to ”Through”.
[5]	Audio file source only
[6]	Not displayed while using 3 way system.
[7]	Unable to change the setting while using 3 way system.

5Select a value using [Control] knob.

Exiting from the Function setting mode Press and hold [1/6].

When you selected “iPod” for “Preset Equalizer”

• When you selected “iPod” for “Preset Equalizer”, next select

“BAND7”;	1 kHz, “BAND8”; 1.6 kHz,
“BAND9”;	2.5 kHz, “BAND10”; 4 kHz,
“BAND11”; 6.3 kHz, “BAND12”; 10 kHz,
“BAND13”; 16kHz
6 Select a value using [Control] knob.

Exiting from the Function setting mode Press and hold [1/6].

When the “Manual Equalizer” item is not displayed

• This function is not available when “iPod” is selected for

•You can compensate the distances in more details by using <4-7. Delay time control> (page 16) function.

“Sound Enhancements”[4]

“Supreme”[5]	Turns ON/OFF the Supreme function.
	Can be set while Audio file source of USB/
	CD and iPod source.
	“ON”/ “OFF”
“HIGHWAY-SOUND”	Compensates the low volume or bass
[3]	sound being lost by road noises to make
	vocal sound clearer.
	“OFF”/ “Low”/ “Middle”/ “High”
“Space Enhancer”[3]	Virtually enhances the sound space using
	the DSP.
	“OFF”/ “Small”/ “Medium”/ “Large”

12 KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL

an equalizer curve. Select a desired equalizer curve using

[Control] knob from among 22 equalizer curves displayed

after you selected “iPod”.

“Preset Equalizer”.

English 13