Kenwood KDC-7090R, KDC-V7090R Forced Closing, Sliding the faceplate:, Faceplate Angle Adjustment, Hold down the ANG button for one second or more

The original source (i.e., the one used before the phone call) is returned to automatically, and the volume restored gradually.

Faceplate Angle AdjustmentYou can adjust the faceplate angle for easy viewing.Sliding the faceplate:Hold down the ANG button for one second or more.

NOTE

Do not apply excessive force to the faceplate under setting 2.Forced ClosingThis function prevents tampering with the unit your car is being serviced etc.

Hiding the unit with the ignition turned on (forced closing): Hold down the SRC button for one second or more.

The faceplate will slide open. When the period of time which you have set in the "Time setting for removing the faceplate" in the menu has passed, the faceplate automatically reverses to hide the control panel. However, you can remove the faceplate during that period. For details, refer to the "Removing the faceplate" (page 12).

NOTE

•When the closing faceplate is hit by an object, the unit will turn off without the faceplate closing all the way. Remove the object and press the SRC button to turn the unit back on, then turn it off again to make it close properly.

•Do not try to press the buttons on the control panel as the faceplate is moving, as excessive force may damage the unit.

•During the forced closing of the unit (i.e., having the unit left closed whilst ignition is turned on), the faceplate will not open no matter how often the ignition is turned on or off.

You can prevent tampering of the unit when letting someone else drive your car by keeping it closed this way.

To cancell the forced closing of unit and open control panel: Press the left part at the upper side of the faceplate.

The faceplate will open and show the control panel.

— 11 —