General features

English

Removing the Faceplate

The faceplate can be detached from the unit, helping to deter theft.

Removing the faceplate:

1Choose the way from among the following and open the faceplate.

Turn the ignition off, hold down the SRC button for one second or more when the control panel has been hidden.

2Holding the centre part of the faceplate, pull it out during the period which you have set in the "Time setting for removing the faceplate" (page 33) in the menu.

The faceplate bracket will automatically close.

2CAUTION

•When removing the faceplate, pull it out only when it is fully open. The detachment of the faceplate whilst it is moving might result in damage to the unit.

•Do not apply excessive force to the faceplate bracket without attaching the faceplate. Doing so will cause the faceplate bracket to be deformed.

•Do not touch the connector on the faceplate bracket after removing the faceplate. Touching the connector may cause damage to the unit.

NOTE

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case whilst detached.

•Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Reattaching the Faceplate:

1Hold the faceplate so that the control panel faces the front toward you and set the left side of the faceplate in the faceplate bracket.

2CAUTION

Do not set the right side of the faceplate in the faceplate bracket first, when reattaching the faceplate. Doing so may cause the connector on the faceplate bracket to malfunction.

2Press the right side of the faceplate until it locks.

Clock displayChanging the Clock Display:

Press the CLK button to switch the clock display on and off.

NOTE

The clock indicator lights whilst the clock is displayed.

— 12 —