Tuner features

English

Tuning

1Press the SRC button repeatedly until the tuner mode is obtained. "TUNER" is displayed only when the tuner mode is selected.

2Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3.

Press the AM button to select the MW and LW bands.

3• Auto Seek Tuning

Press the ¢ button to seek increasing frequencies. Press the 4 button to seek decreasing frequencies.

•Preset station seek tuning

Press the ¢ button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the next lowest number).

NOTE

If the frequencies stored at the preset numbers receive stations which were not originally memorized when travelling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1.

•Manual Tuning

Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.

NOTE

•The ST indicator lights up when stereo broadcasts are being received.

•Please see the menu settings about selecting tuning mode. (page 34)

Direct Access Tuning

(Function of remote control)

When you know the frequency of the station that you want to listen to, you can input it directly for quick access.

1Select the band by pressing the FM or AM button.

2Press the DIRECT button.

"----" is displayed for 10 seconds.

If you make no input in the 10-second period, direct access tuning is automatically cancelled.

3Enter the frequency of the desired station.

If you want to listen to an FM station at 92.1 MHz, for example, press 0, 9, 2, and 1.

If you want to listen to an AM station at 810 kHz, for example, press 0, 8, 1, and 0.

NOTE

•You cannot enter frequencies above or below what a band can receive.

•FM frequencies can only be input in 0.1 MHz steps, and not 0.01MHz steps.

Cancelling Direct Access Tuning:

Press the DIRECT button again.

Station Preset Memory

Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button.

1Select the band/station that you want to have stored.

2Hold down the button (#1-6) that you want to use for the station, for two seconds or more.

The button number blinks once in the display to indicate that the data has been stored.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

NOTE

You can store 6 stations in each of the FM1, FM2, FM3, and AM (MW and LW) bands.

— 16 —