▼

Tuner mode

▼

CD mode

▼

External disc control mode 1

▼

External disc control mode 2 / AUX mode

▼

Standby mode

NOTE

•The mode switches to the next mode from any mode which cannot be used.

•The external disc control mode will differ depending on the unit that is connected.

•To enable the selection of External disc control mode 2/AUX mode, you should connect optional switching adapter KCA- S210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC- CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you to select AUX mode only).

During the AUX mode, "AUX" (or AUX-name display) will show in the display.

When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode.

•If you have selected Standby mode, the timer function that turns the power off automatically will be activated.

To find out how to set the time on the timer, and how to cancel the timer function, refer to the section on the Power OFF Timer function under Menu settings (page 35).

• ATT button

Turns down the volume quickly. To return the volume to its original level, press the button again. Turning the volume up, or turning it all the way down deactivates the attenuator function.

Tuner features

•4/¢ buttons

Press the 4 button to make decreasing seeks (using the preset tuning mode).

Press the ¢ button to make increasing seeks (using the preset tuning mode).

•AM/FM buttons

Press the AM button to select the MW and LW bands.

Press the FM button to select and switch between FM1, FM2, and FM3 bands.

•DIRECT/OK button

Enters and cancells the Direct access tuning mode.

•38 button

Enters and cancells the Programme Type Selection (PTY) mode.

•Number/letter entry buttons

Press buttons #1-6 to recall preset stations.

Use to enter frequency of the desired station during Direct access tuning mode.

— 37 —