Menu settings
English
If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft.
When using the unit for the first time:In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask Key's signal.
If this procedure is not carried out, the control panel of the unit will
1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.
2Hold down the MENU button for one second or more. "MENU" is displayed and "Mask key" appears in the display.
3Hold down either the 4 or ¢ button for one seconds or more.
"TRANSMIT 1" will appear in the display, indicating the setting mode has been entered.
4Hold down the transmit button on the Mask key until the full transmit level indicator lights up in the display.
"TRANSMIT 2" will be displayed.
Transmission part
Transmit button
NOTE
•Keep the Mask Key close to the signal sensor when you transmit the Mask Key’s signal.
•If the Mask Key’s signal does not be received correctly, the display will return to "TRANSMIT 1" . In this case, repeat the
procedure in step 4.
5Hold down the transmit button on the Mask key again until the full transmit level indicator lights up in the display. "APPROVED" will appear in the display, with the Mask key function turning on.
If you press the RESET button or remove the battery:The first time you turn the unit on again, "TRANSMIT 1" will appear in the display, indicating the setting mode has been entered. Repeat steps 4 and 5 above, and transmit the signal. You can start operating the unit again when "APPROVED" appears in the display.
Touch Sensor ToneThis function produces a beep sound that accompanies button operation. It can be switched on or off.
Display and setting:
"Beep ON" : Beep setting is on. (Default setting)
"Beep OFF" : Beep setting is off.
NOTE
The beep sound is not output from the preout jacks.
Manual Time AdjustmentAdjust the time manually.
NOTE
This adjustment is available only when the automatic time adjustment is set to off. (page 31)
Display and setting:
1Select the display "Clock Adjust" during the selecting function in the menu system.
2Hold down either the 4 or ¢ button for one second or more to enter the Manual time adjustment mode.
— 30 —