Menu system

In Standby mode

Built-in Auxiliary input Setting

Set the Built-in Auxiliary Input function.

Display

Setting

"AUX OFF"

When selecting the source there’s no Auxiliary Input.

"AUX ON"

When selecting the source there’s Auxiliary Input.

In Standby mode

Power OFF Timer

Setting the timer to turn this unit’s power OFF automatically when Standby mode continues. Using this setting can save the vehicle’s battery power.

Display

Setting

"OFF – – –"

Power OFF Timer function is OFF.

"OFF 20M"

Turns the power OFF after 20 minutes.

(Original setting)

 

"OFF 40M"

Turns the power OFF after 40 minutes.

"OFF 60M"

Turns the power OFF after 60 minutes.

In Standby mode

CD Read Setting

When there is a problem with playing a CD with special format, this setting plays the CD by force.

Display

Setting

"CD READ1"

Play CD and Audio file.

"CD READ2"

Play CD by force.

⁄

•Some music CDs may not play even in the "CD READ2" mode.

Other than Standby mode

Audio Preset Memory

Registering the value setup by Sound Control. The memory cannot be erased by the Reset button.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-<Audio Control> (page 8)

-<Audio Setup> (page 8)

2Enter Menu mode

Press the [MENU] button. "MENU" is displayed.

3Select Audio Preset modePush the Control knob towards up or down. Select the "A-PRESET" display.4Enter Audio Preset modePress the Control knob for at least 1 second.5Select the Audio Preset MemoryPush the Control knob towards up or down. Select the "MEMORY" display.6Put the Audio Preset in the memory

Press the Control knob for at least 2 seconds. The "MEMORY" display blinks 1 time.

7Exit Audio Preset mode Press the [MENU] button.

⁄

•Register 1 pair of Audio Preset Memory. You cannot register by the source.

•When you press the Reset, all the sources will be the setting value which is registered.

•The following items cannot be registered. Volume, Balance, Fader, Loudness, Volume offset

28 English