Kenwood KDC-W6537U, KDC-W6537UY Attenuator, Audio Control, Audio Setup, Range, Range, Display, Display, ⁄About System Q, Press the [ATT] button, 5Exit Audio Setup mode

General features

Attenuator

Turning the volume down quickly.

Press the [ATT] button.

Each time you press the button, the Attenuator turns ON and OFF.

When the Attenuator is ON, the "ATT" indicator blinks.

Audio Control

1Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the [VOL] knob.3Select the Basic Audio item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

4Adjust the Basic Audio item Turn the [VOL] knob.

Adjustment Item	Display	Range
Subwoofer level	"SW L"	–15 — +15
System Q	"USER"/"ROCK"/"POPS"/	User/Rock/Pops/
	"EASY"/"TOP40"/"JAZZ"/	Easy/Top 40/Jazz/
	"NATURAL"	Natural
Bass level*	"BAS L"	–8 — +8
Middle level*	"MID L"	–8 — +8
Treble level*	"TRE L"	–8 — +8
Balance	"BAL"	Left 15 — Right 15
Fader	"FAD"	Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

*Source tone memory: Puts the set up value in the memory per source.

⁄About System Q

•You can recall the best preset sound setting for different types of music.

•Change each setting value with the <Speaker Setting> (page 9). First, select the speaker type with the Speaker setting.

•"USER": The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically.

5Exit Audio Control mode Press any button.

Press a button other than the [VOL] knob and [ATT] button.

Audio Setup

Setting the Sound system, such as Cross over Network.

1Select the source to adjust Press the [SRC] button.

2Enter Audio Setup modePress the [VOL] knob for at least 1 second.3Select the Audio Setup item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

4Setup the Audio item Turn the [VOL] knob.

Adjustment Item	Display	Range
Front High Pass Filter	"HPF"	Through/40/60/80/100/120/
		150/180/220 Hz
Rear High Pass Filter	"HPR"	Through/40/60/80/100/120/
		150/180/220 Hz
Low Pass Filter	"LPF"	50/60/80/100/120/Through Hz
Subwoofer Phase	"PHAS"	Reverse (180°)/ Normal (0°)
Volume offset	"V-OFF"	–8 — ±0 (AUX: -8— +8)
Loudness	"LOUD"	OFF/ON

⁄

•Volume offset: Sets each source’s volume as a difference from the basic volume.

•Loudness: Compensates for low and high tones

during low volume. (Only the low tone is compensated for when the tuner is selected as a source.)

5Exit Audio Setup mode

Press the [VOL] knob for at least 1 second.

8 English