Connecting Wires to Terminals

USB connector (1m)

To USB device

REMO.CONT

Steering remote control (Light Blue/

 

Yellow) (KDC-W6537U only)

Do not remove the cap when you do not use the USB cable. The connector will cause the unit to malfunction if it gets in touch with any metallic part of the vehicle.

IN

AUX input (Stereo)

Use the mini-plug which is stereo type

AUX

and does not have any resistance.

To Kenwood disc changer/

FM/AM antenna input

External optional accessory

Antenna Cord (ISO)

 

 

Antenna Conversion Adaptor (ISO–JASO)

 

(Accessory3)

Front left output (White)

Front right output (Red)

Fuse (10A)

Rear left output /Sub Woofer left output (White)

Rear right output /Sub Woofer right output (Red)

Wiring harness (Accessory1)

To connect these leads, refer to the relevant instruction manuals.

TEL mute wire (Brown)

MUTE

If no connections are made, do not let the wire come out from the tab.

Power control/Motor antenna control wire (Blue/White)

P.CONT

ANT.CONT

 

 

 

 

Battery wire (Yellow)

 

 

 

 

Ignition wire (Red)

 

 

 

 

See next page

 

 

 

 

A–7 Pin (Red)

 

 

 

 

A–4 Pin (Yellow)

8

6

4

2

Connector A

7

5

3

1

 

8

6

4

2

Connector B

7

5

3

1

 

Connect to the terminal that is grounded when either the telephone rings or during conversation.

To connect the Kenwood navigation system, consult your navigation manual.

Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.

English 33