About Audio file

•Playable Audio file

AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav)

•Playable disc media CD-R/RW/ROM

•Playable disc file format

ISO 9660 Level 1/2, Joliet, Romeo, Long file name.

•Playable USB device

USB mass storage class, iPod with KCA-iP200

•Playable USB device file system FAT16, FAT32

Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.

• Playing order of the Audio file

In the example of folder/file tree shown below, the files are played in the order from ① to ⑩.

CD () <<: Folder v vv: Audio file



 v

v

 v  v

v.

An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.

⁄

•In this manual, the word "USB device" is used for flash memories and digital audio players which have USB terminals.

•The word "iPod" appearing in this manual indicates the iPod connected with the KCA-iP200 (optional accessory). The iPod connected with the KCA-iP200 can be controlled from this unit. iPods that can be connected with the KCA-iP200 are the iPod nano and the iPod with video. When an iPod is connected using a commercially available USB cable, it is handled as a mass-storage-class device.

•For the supported formats and types of USB device, refer to www.kenwood.com/usb/.

About USB device

•Install the USB device in the place where it will not prevent you from driving your vehicle properly.

•You cannot connect a USB device via a USB hub.

•Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device.

We shall have no compensation for any damage arising out of erasure of the stored data.

•No USB device comes with this unit. You need to purchase a commercially available USB device.

•For how to play the audio files recorded in a USB device, see <CD/USB device/Audio file/External disc control features> (page 16).

•When connecting the USB device, usage of the CA- U1EX (option) is recommended.

Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.

About DAB Tuner control

Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function.

However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction.

<Auto Ensemble Memory Entry>

1.Select the preset band for Auto Ensemble Memory Entry.

2.Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry.

After storing in the memory finishes, the number of the pre-set buttons and the ensemble label are displayed.

<Searching by programme type and language> and <Languages to be displayed> in <Programme Type (PTY) Function>

At the operation to press [DISP] button, use [TI] button instead.

English 5