32 | English
Menu system

Other than Standby mode

B.M.S. (Bass Management System)

Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"AMP Bass:Flat" Bass boost level is flat.
"AMP Bass:+6" Bass boost level is low (+6dB).
"AMP Bass:+12" Bass boost level is mid (+12dB).
"AMP Bass:+18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers, there are the models you can set from
Flat to +18 dB, and the models you can set from Flat
to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass:+18" will not work
correctly even if it is selected.

Other than Standby mode

B.M.S. Frequency Offset

Setting the central frequency, boosted by B.M.S.
Display Setting
"AMP FREQ:Normal" Boost with the normal central frequency.
"AMP FREQ:Low" Drop the normal central frequency 20%.

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the
unit.
1 Select AMP Control mode
Push the Control knob towards [FM] or [AM].
Select the "AMS Control" display.
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Push the Control knob towards [4] or
[¢].
5 Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.

In FM reception

CRSC (Clean Reception System

Circuit)

Temporarily have reception alternate from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display Setting
"CRSC:ON" The CRSC is ON.
"CRSC:OFF" The CRSC is OFF.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.

In HD Radio mode

Receive mode Setting

Sets the receive mode.
1 Select the Receive mode
Push the Control knob towards [FM] or [AM].
Select the "Receive Mode" display.
2 Enter Receive mode
Press the Control knob for at least 1 second.
3 Set the Receive mode
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the Receive mode
alternates between the modes shown in the
table below.