Basic Operation

Changing the general settings

1Press and hold [AUDIO/MENU] so that one of menu items appears.2Press [AUDIO/MENU] repeatedly to scroll between menus.

AF ON—REG ON—TA ALARM—PI SOUND— AUX ON—AUX 0dB—DEMO OFF—BEEP 2ND

3Rotate VOL clockwise or counterclockwise to select one of the settings.

The setting displayed on the display is set and automatically disappears after about 6 seconds.

•AF (Alternative Frequency) ON/OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes.

AF ON: Wherever you drive, you can continue to listen to the same program without interruptions. AF OFF: Only station name will be displayed. In case of poor reception no alternative station can be used.

•REG (Region) ON/OFF

REG ON: The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak.

REG OFF: The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received.)

•TA(Traffic Announcement) ALARM/SEEK

TA ALARM: When a newly tuned station has no TP information for five seconds, a double beep sound is output.

TA SEEK: When the newly tuned station does not receive TP information for five seconds, the receiver retunes to the next station.

•PI (Program Identification) SOUND/MUTE

PI SOUND: If the sound of a station with different PI is heard intermittently, the receiver mutes the sound after one second.

PI MUTE: If the sound of a station with different PI is heard intermittently, the receiver mutes the sound right now.

•AUX (Auxiliary) ON/OFF

It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX ON: When using a auxiliary equipment. AUX OFF: When not using a auxiliary equipment.

•AUX (Auxiliary) 0 dB/+6 dB

You can adjust the volume level of each source to prevent radical changes in volume when switching between sources. You can set to 0dB or +6dB. If the input level of the connected component is not high enough, increase the input level properly. Without adjusting the line input level, you may be surprised at a loud sound when you change the source from the external component to another source.

•DEMO ON/OFF

You can change the initial indication on the display to information name (function name, EQ name, etc...) while listen to a source.

DEMO ON: Displays information name while listen to source.

DEMO OFF: Cancels the function.

•BEEP 2ND/ALL

Sets the beep sound every time a button is pressed.

BEEP 2ND: The beep is generated when a key is long pressed (one sec.).

BEEP ALL: The beep is generated when any key is pressed.

⁄

•You can also select one of the settings by pressing [VOL+/–] on the remote control.

12 KDV-3241Y