Installation
■ Removing the hard rubber frame| ■ Removing the Unit |
English
1 Engage the catch pins on the removal tool and remove the two locks on the lower level.
1 Refer to the section “Removing the hard rubber frame” and |
then remove the hard rubber frame. |
Lower the frame and pull it forward as shown in the figure.
Catch
Lock
Accessory2 Removal tool
2When the lower level is removed, remove the upper two locations.
NOTE
The frame can be removed from the top side in the same manner.
2 | Remove the screw (M4⋅8) on the back panel. |
3 | Insert the two removal tools deeply into the slots on each |
| side, as shown. |
Screw (M4X8) | Catch facing up |
(commercially |
|
available) |
|
| Accessory2 Removal tool |
4Lower the removal tool toward the bottom, and
pull out the unit halfway whilst pressing towards the inside.
2CAUTION
Be careful to avoid injury from the catch pins on the removal tool.
5Pull the unit all the way out with your hands, being
careful not to drop it.
— 30 —