English
Troubleshooting Guide
MD/External disc control modePROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
|
|
The MD cannot be inserted. | There is already an MD loaded. | Eject the currently loaded MD and then load the new one. |
|
|
|
|
|
The MD does not load. | The insertion orientation of the MD is incorrect or the MD | Insert the MD in the proper orientation. |
|
| is upside down. |
|
|
|
|
|
|
The MD loads but soon comes | Nothing is recorded on the MD. | Replace the MD with one that is recorded. |
|
out again. |
|
|
|
|
|
|
|
The sound skips. | The mounting angle exceeds 30°. | Adjust to an angle of less than 30°. |
|
|
|
|
|
| The mounting is unstable. | Fix the unit securely. When the sound skips at the same |
|
|
| portion even when the car is stopped, the problem lies |
|
|
| with the MD. |
|
There is noise during playback. | The MD is soiled with dust or dirt. | If another MD is played back and there is no problem, |
|
|
| then the problem is due to the sound quality of the MD |
|
|
| itself. |
|
The disc control mode cannot | No cable has been connected to the disc changer input | Connect the cable to the disc changer input terminal on |
|
be selected. | terminal on the unit. | the unit. |
|
|
|
|
|
The specified disc does not | The specified CD is very dirty. | Clean the CD. |
|
play, but another one plays |
|
|
|
instead. | The CD is | Load the CD with the labelled side up. |
|
|
|
|
|
| The disc is loaded in a different slot from that specified. | Eject the disc magazine and check the number for the |
|
|
| specified disc. |
|
|
|
|
|
| The disc is severely scratched. | Try another disc instead. |
|
|
|
|
|
— 32 —