"Bass" : Adjust the bass level.

Setting values: - 8 – + 8

"Treble" : Adjust the treble level.

Setting values: - 8 – + 8

"Balance" : Adjust the balance level. Setting values: Left 15 – Right 15

"Fader" : Adjust the fader level. Setting values: Rear 15 – Front 15

"V OFFSET" : Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level.

Setting values: - 8 – ± 0

"ec4"/"dB" : Recalling the kenwood preset sound setting Press the preset buttons (#1-6).

Settings: #1;Flat, #2;Rock, #3;Pops/Top40, #4;Jazz, #5;Easy, #6;Scan of #1-5

NOTE

•This mode is available only when the Sound coordinate system is on. (page 24)

•You can call the following settings with this function; bass centre frequency, bass level, bass quality factor, bass extension, treble centre frequency, and treble level setting. Their setting values are different depending on the setting of the mobile preset plan mode.

Mobile Preset

This function allows you to adjust the setting that is recalled with the sound coordinate system, according to types of speakers.

1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.

2Press the AUD button to enter the mobile preset plan mode.

3Press either the 4 or ¢ button to select the type of speaker. The setting switches as follows.

Off / For the OEM speaker / For 6/6x9 in. speaker / For 5/4 in. speaker

4Press the AUD button to end the mobile preset plan mode.

NOTE

•This mode is available only when the Sound coordinate system is on. (page 24)

•When you change the setting of type of speaker, the bass and treble tone settings are returned to original levels.

— 7 —