Digital connections

Setting up the system

KR-V888D (En/T)

1 1

Make connections as shown below.

The digital in jacks can accept either Dolby Digital (AC-3) or PCM signals (the input signal type is detected automatically). When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting.

Do not connect the power cord to a wall outlet until all connections are completed.

OPTICAL DIGITAL OUT (AUDIO)

Optical fiber cable

Connect components capable of outputting Dolby Digital (AC-3) or standard PCM format digital signals.

COAXIAL DIGITAL OUT (AUDIO)

 

 

or

 

 

RCA pin cord

 

 

 

RCA

 

 

 

 

 

pin

 

 

AC-3

VIDEO2

VIDEO3

cord

 

 

DIGITAL

PLAY IN

PLAY IN

AC-3 DIGITAL

AC-3 RF

DC IN

IN

(OPTICAL)

(COAXIAL)

OUTPUT

INPUT

12V

 

 

 

OFF ON @ #

Component with an AC-3 (or

PCM) OPTICAL DIGITAL OUT

Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See "Connecting video components".)

Component with an AC-3 (or

PCM) COAXIAL DIGITAL OUT

Connect the video signal and analog audio signals to the VIDEO 3 jacks. (See "Connecting video components".)

Preparations

AC-3 RF OUT (AUDIO)

RCA pin cord

LASER DISC RF DEMODULATOR DEM-999D

POWER LOCK

To connect an LD player with a DIGITAL RF OUT. Connect the LD player to the KENWOOD RF digital demodulator (DEM-999D). Then connect the demodulator to the VIDEO 3 DIGITAL IN.

Connect the video signal and analog audio signals to the VIDEO 3 jacks. (See "Connecting video components".)

AC-3 RF Demodulator DEM-999D

12

LASER DISC RF DEMODULATOR DEM-999D

POWER LOCK

1POWER indicator

Lights (red) when the power switch (5) is set to ON .

2LOCK indicator

Lights when an AC-3 RF signal is input to the AC-3 RF INPUT jack (4).

3AC-3 DIGITAL OUTPUT (coaxial)

Connect this jack to the coaxial AC-3 DIGITAL IN jack on your receiver. It outputs AC-3 coaxial digital signals when the POWER (5) is set to ON and an AC-3 RF signal is input to the AC-3 RF INPUT jack (4).

34 5 6

AC-3 DIGITAL

AC-3 RF

DC IN

OUTPUT

INPUT

12V

OFF ON @ #

EXTERNAL DC SUPPLY DC 12V

4AC-3 RF INPUT

Connect this jack to the AC-3 RF OUTPUT jack on your LD player.

5POWER switch

Use to switch the power ON/OFF.

6DC IN (12V) jack

Connect this jack and inlet power cord to the AC adaptor supplied with your demodulator. Connect the power cord to a wall outlet after completing all of the other connections.

Place the power supply away from the demodulator, receiver, and any antennas.