Getting the most from your remote control
The remote control supplied with this receiver is also capable of controlling components from a variety of manufacturers once
3 8 you register the appropriate setup codes into the remote control unit. |
|
Refer to "Remote operation of other components" for details about the operations available for each component. | U |
* When registering setup codes for KENWOOD audio components which are connected to this unit by system control cords, use the
following codes to insure proper system control operation: Cassette: 7000, CD: 8099, MD: 9000.@ To control other KENWOOD components (VCRs, LD players, audio components not connected with system control cords, etc.) follow the procedure described below.
Low battery warning
Replace all four batteries with new ones when you notice a shortening of the distance from which the remote control will operate or if the remote control blinks 5 times when you push a key. The remote control is designed to retain set up codes in memory while you change batteries.
Registering setup codes for other components
1Find the setup code of the component to be registered.
• Refer to the setup code lists to find the setup code for the
component to be registered.i
Example: To register a CD made by KENWOOD, you would enter "8037"
•If you purchase a new component that is not covered by the setup code list, you can use the FutureSet upgrade feature.
y
2Hold down the ENT key until the backlight flashes twice and remains lit.
ENT
Input | Component | Maker | Code | Key |
|
|
|
|
|
(CD) | CD player | KENWOOD | 8028, 8037 | AUDIO |
|
|
|
|
|
VIDEO 1 |
|
|
|
|
|
|
|
|
|
VIDEO 2 |
|
|
|
|
|
|
|
|
|
VIDEO 3 |
|
|
|
|
|
|
|
|
|
TAPE/MD |
|
|
|
|
|
|
|
|
|
CD |
|
|
|
|
|
|
|
|
|
PHONO |
|
|
|
|
|
|
|
|
|
— | TV 1 |
|
|
|
|
|
|
|
|
— | TV 2 |
|
|
|
|
|
|
|
|
— | CABLE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•At this time all inputs become available regardless of any earlier registration.
Control Remote
3Select the component to be registered.
Press the VIDEO, AUDIO, or TV key repeatedly to select the desired component.
AUDIO
VIDEOTV
Perform each of the following steps within 
5 seconds.
VIDEO key | AUDIO key | TV key | |||||
|
| 1 VIDEO1 (SAT) |
| 1 CD (CD) |
|
| 1 TV1 |
|
| 2 VIDEO2 (LD) |
| 2 TAPE/MD |
|
| 2 TV2 |
|
| 3 VIDEO3 (VCR) |
| (TAPE) |
|
| 3 CABLE |
|
| ||||||
|
|
|
|
| |||
3PHONO
•Example : To register the component connected to the VIDEO 1 jacks, select "VIDEO 1 (SAT)".
SP. A sAT