Kenwood KR-V888D Surround Play

	Ambience effects
	KR-V888D (En/T)
DOLBY AC-3 can be used when playing DVD or LD software bearing the	mark and DOLBY DIGITAL (AC-3) for-

3 4 mat digital broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video, DVD, or LD software

bearing the	mark. DSP modes can be used with any source.
Be sure to complete "Surround set up" before using any of these surround modes.		^

Preparations

•Turn ON related components.

•Complete "Surround set up". ^

•Set the INPUT SELECTOR to the component you wish to play back with surround sound.

Surround Play

1Select the SOUND menu.

Operations

OSD	RT	S.DIR	SET
			UP

SOUND

AC-3 PRO LOGIC 3 STEREO DSP STEREO

2Select a surround mode.

Select the icon for the mode you desire. The selected icon turns blue. The surround mode settings are stored separately for each

input. Surround modes can also be selected by using the LISTEN MODE key on the remote control. fl

OSD	RT	S.DIR	SET
			UP

AC-3 PRO LOGIC 3 STEREO DSP STEREO

Midnight mode fi

Source direct fl

Displays set up menu fl

OSD fl

Radio Text fl

DOLBY DIGITAL (AC-3)

When a Dolby Digital (AC-3) format signal is input, press to select the Dolby Digital (AC-3) mode. To select this icon, the input selector must be set to VIDEO 2 or 3. No sound will be heard if selected when normal stereo sources are input.

DOLBY (PRO LOGIC)

Selects the DOLBY PRO LOGIC mode.

To select this icon, the surround speakers

must be selected. ^

DOLBY (3 STEREO)

Selects the DOLBY 3 STEREO mode.

To select this icon, the center speaker must

be selected. ^

DSP

Turns on the current DSP mode and switches to the DSP screen where you can adjust various aspects of each DSP mode.

STEREO

Cancels surround playback.

If selected when a Dolby Digital AC-3 signal is input, the 2 CH DOWNMIX indicator on the front panel lights up and the signals are downmixed to 2 channel stereo.

Source Direct (S.DIR)

Lets you pass the source material direct to the amplifier, bypassing any audio process- ing.

3Press the SOUND key on the remote to turn off the on-screen display, then press either VIDEO, AUDIO, or TV key on the remote to cancel the OSD remote control mode.

4Start playing the video software.

5Adjust the volume.

Note

To enjoy Dolby Digital (AC-3) surround (as well as all the other surround modes) from a single component, be sure to use a Dolby Digital (AC- 3) compatible source component. Connect the Dolby Digital (AC-3) compatible source component's AC-3 format digital audio signal to one of the DIGITAL INPUT jacks on the back of the receiver. Connect the normal audio signal correctly to the respective component's AUDIO jacks.

0!