Kenwood KRF-V5010, KRF-V6010, KRF-V7010 Connecting the speakers, Powered, Powered, 2 Loosen, 3 Insert, 4 Secure, Surround, Speakers, SPEAKERS, KRF-V7010, subwoofer, Subwoofer, SPEAKERS B, SPEAKERS B

Connecting the speakers

1 Strip coating. 2 Loosen.

3 Insert. 4 Secure.

Setting up the system

KRF-V7010/V6010/V5010 (En/T)

11

1 Strip coating. 2 Push lever.

3 Insert cord. 4 Return lever. Preparations

Front Speakers A

Right Left

Center Speaker

A

+ +

The KRF-V6010 and KRF-V5010 are equipped with one- touch speaker termi- nals. They are arranged in the same manner as the speaker terminals of the KRF-V7010. Refer to the instructions on making connections to the KRF-V7010 when making connections to the KRF-V6010 or KRF-V5010.

R L C

•Never short circuit the + and – speaker cords.

•If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly.

Speaker impedance

After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver.

			+
-		-	-
R	L	C
FRONT SPEAKERS CENTER SPEAKER			FRONT	CENTER
			SPEAKERS	SPEAKER
KRF-V7010			Except for KRF-V7010

CENTER		FRONT SPEAKERS
	L	R			L
		+	-	B -	+
	R
SUB	SURROUND
WOOFER
PRE OUT
	Use the FRONT	+ R	-	-	L +
		SURROUND SPEAKERS
	SPEAKERS B
	terminals if you
	want to connect a
	second front
	speaker system.
	(KRF-V5010 is not
	equipped with
Powered	SPEAKERS B
	terminal.)	Right			Left
subwoofer		Surround Speakers

(Be sure to connect both surround speakers)

PRE OUT connections

This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown in the example below.

CENTER

L

Power amplifier	Surround
R	Speakers
SUB
WOOFER SURROUND
PRE OUT
	Powered
	Subwoofer
	Center Speaker
Power amplifier

•The KRF-V5010 is equipped with a SUBWOOFER terminal only.

•Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.

•To use the PRE OUT jacks, press the SPEAKERS A key to the on position (the SPEAKERS key in the case of the KRF-V5010).