Kenwood KRF-V5010, KRF-V6010, KRF-V7010 Recording, Recording audio, Recording video, Listening with headphones, MONITOR function (analog sources only)

Normal playback Recording

KRF-V7010/V6010/V5010 (En/T)

Recording audio

16

VIDEO 2 / MONITOR

Muting the sound

MUTE lets you mute the sound of the speakers.

Press the MUTE key.

SP A	L	R
MUTE		SW

C

Operations

Blinks

INPUT SELECTOR

• On the KRF-V5010, this selection can be made using the control on

Recording a music source

the receiver as well.

To cancel

When recording a music source, switch the VIDEO2/MONITOR

setting to “MONITOR”.

8

Press the MUTE key again so that the “MUTE” indicator goes off.

• Muting can also be cancelled by adjusting the volume.

1 Use the input selector to select the source (other than “TAPE”)

you want to record.

SOURCE DIRECT playback (analog sources only)

2 Set the cassette deck to record.

Use this function to pass the source material direct to the amplifier,

3 Start playback, then start recording.

bypassing any audio processing.

Press the SOURCE DIRECT key.

Copying tapes

￿

￿

S.DIRECT

When copying tapes, switch the VIDEO2/MONITOR setting to

“MONITOR”.

8

MONITOR = TAPE copying

• Either press the LISTEN MODE, SOUND, and SETUP keys, or

1 Press the VIDEO 2/MONITOR

￿

switch to another input source to cancel SOURCE DIRECT play-

key.

back.

STEREO MONITOR

To cancel

2 Use the input selector to select a source other than “TAPE”.

Press again.

3 Start playback on the cassette deck connected to the VIDEO2/

• If SOURCE DIRECT playback was activated when using a sur-

MONITOR jacks and start recording on the cassette deck con-

nected to the MD/TAPE jacks.

round mode, cancelling it reactivates the previous surround mode.

TAPE = MONITOR copying

Listening with headphones

1 Use the input selector to select “TAPE”.

1 Use the SPEAKERS A or B key (or the SPEAKERS key) to turn

2 Start playback on the cassette deck connected to the MD/TAPE

off the speaker indicator.

jacks and start recording on the cassette deck connected to the

Make sure the SPEAKERS

Make sure the SPEAKERS

VIDEO2/MONITOR jacks.

indicators are turned off.

indicators are turned off.

• To copy tapes using a double cassette deck, refer to the instruc-

tion manual of the double cassette deck.

SP

A

SW

C

A

C

MONITOR function (analog sources only)

You can connect a cassette deck or graphic equalizer to the VIDEO2/

Models other than KRF-V5010

KRF-V5010

MONITOR jacks of the receiver. If a graphic equalizer is connected,

• If you turn off all of the speakers when in the surround mode, the

the VIDEO2/MONITOR key should be left in the on position. Alter-

nately, if a cassette deck equipped with a 3-head system is con-

mode is cancelled as well, resulting in stereo playback.

nected to the VIDEO2/MONITOR jacks, you will be able to monitor the

just-recorded signal while making recordings on the cassette deck.

2 Connect headphones to the PHONES jack.

By switching the VIDEO2/MONITOR key on and off, you can com-

pare the sound of the source signal and the just-recorded signal. For

PHONES

more information, refer to the instruction manual of the connected

component.

To adjust the input level when the monitor function is turned on, use

the SOUND key and the MULTI CONTROL key.

¢

Recording video

3Use the VOLUME CONTROL knob (VOLUME) to adjust the vol-

ume.			When recording video, switch the VIDEO2/MONITOR setting to
			“VIDEO2”.	8
			1 Use the input selector to select the video source (other than
			“VIDEO2”) you want to record.
To adjust the balance			2 Set the video deck connected to VIDEO2/MONITOR to record.
Use the test tone feature.	$	- 3	3 Start playback, then start recording.