Kenwood KRF-V5010, KRF-V6010, KRF-V7010 Listening to radio broadcasts, Tuning (non-RDS)radio stations, 87. 5), 87. 5), AUTO, BAND, BAND, BAND, AUTO, AUTO, AUDIO, TUNER, TUNED, (AUTO), TUNING

Listening to radio broadcasts

Tuning (non-RDS) radio stations

Radio stations can be classified into RDS (Radio Data System) stations and other stations. To listen to or store RDS stations in the preset memory, see the section entitled, "Using RDS".

AUTO

BAND

MULTI CONTROL

	INPUT SELECTOR
AUDIO
BAND	TUNER
	TUNER
(AUTO)	BAND
	BAND
TUNING/SKIP	AUTO
	MULTI CONTROL
RC-R0507	RC-R0307

1Use the input selector to select the tuner.2Use the BAND key to select the desired broadcast band.Each press switches the band as follows:

1 FM	"AM" or "FM" indicator
2 AM	87. 5)	AUTO
	FM
	MHz	STEREO

3Use the AUTO key to select the desired tuning method.Each press switches the tuning method as follows:

1 AUTO lit (auto tuning)

2AUTO not lit (manual tuning)

87. 5)	AUTO
FM	AUTO
MHz	STEREO

•Normally, set to "AUTO" (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.)

4Use the MULTI CONTROL (TUNING/SKIP) to select the station.

"TUNED" is displayed when a station is received

Lights when a broadcast is being received in stereo.

			--	98.	))	TUNED
SP A	L	R			FM	AUTO
		SW			MHz STEREO	ST.
				Frequency display
Auto tuning	: The next station is tuned automatically.
Manual tuning :		Turn the knob (press the key) to select the
		desired station.

• You can also use the TUNING key on the remote control (RC- R0307) to make the selection.

KRF-V7010/V6010/V5010 (En/T)

Using RDS (Radio Data System)

RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name.

RDS functions:PTY (Program Type Identification) Search)

Automatically tunes to a station that is currently broadcasting the specified program type (genre).

EON (Enhanced Other Network) reservation)

Sets the tuner to automatically switch to stations broadcasting one of two types of programs, even though you are listening to another station. The tuner returns to the original station when the broadcast of the selected program ends.

PS (Program Service Name) Display

Automatically displays the station name transmitted by the RDS station.

RDS Auto Memory function	*
Automatically selects and stores up to 30 RDS stations in the preset
memory.
If fewer than 30 RDS stations have been stored in the preset memory,
regular FM stations will be stored in the remaining places.		Operations
you press the DISPLAY key. There is no display if no text data was		Operations
Radio text function
Displays the radio text data transmitted by some RDS stations when
transmitted.

The "RDS" indicator lights up when an RDS broadcast (signal) is received.

SP	A B TI.VOL	L	R	--	29.	FM AUTO SOUND DIGITAL		AUTO
	MUTE		SW			AM PRO LOGIC S.DIRECT MEMO.
RDS EON PTY						MHz STEREO	MONITOR	ST.
TP	TA NEWS					5)kHz DOWNMIX	DSP	TUNED

Note

Some functions and function names may differ for certain countries and areas.

Before using a function utilizing the RDS, be sure to perform the RDS Auto Memory operation by referring to the description in “Presetting

RDS stations (RDS AUTO MEMORY)”.