Surround Play
DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing
video, DVD, or LD software bearing the mark. DSP modes can be used with any source.
LISTEN MODELISTEN MODE | LISTEN MODE |
Preparations
• Turn ON related components. |
|
• Complete "Preparing for surround sound". | # |
•Set the INPUT SELECTOR to the component you wish to play back with surround sound.
1Start playing the video software.2Press the LISTEN MODE key to select the listening mode.Listening mode settings are stored independently for each input.
Each press of the LISTEN MODE key switches the setting as listed below.Note that the only listening mode settings that can be used for playback with the current speaker settings are available.
•DOLBY PRO LOGIC•DOLBY 3 STEREO•LIVE (DSP)•HALL (DSP)•STEREOExample with the DOLBY PRO LOGIC mode selectedThe channels from which sound will issue are displayed.
SP A B | L C R | PRO | LO GI |
| SW |
| PRO LOGIC |
| S |
|
|
DVD 6-channel playback
23
Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback.
INPUT SELECTOR
VIDEO
DVD/6CH INPUTOperations | ||
Preparations |
| |
|
|
•Connect your DVD player to the DVD 6ch jacks of the receiver.
•Turn on all other components that will be used.
• Complete “Preparing for surround sound”. | # |
•If speaker system B is on when “DVD 6ch” is selected as the input source, it switches off and speaker system A turns on automatically (models other than
•It is not possible individually to adjust the volume level or sound quality (SETUP, SOUND) of the separate channels when the receiver is in the DVD 6ch mode. Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer’s own volume control.
•When in the DVD 6ch mode, you can still use the volume control, mute, SPEAKERS (A) key, and dimmer functions.
3Adjust the volume.