Kenwood KRF-V7050D, VR-507 (P.CALL), (up to “40”), presets (1 – 40), 1Tune to the station you want to store, 1Press TUNER to select tuner as the source

24Presetting radio stations manually

MULTI CONTROL

MEMORY

1Tune to the station you want to store.2Press the MEMORY key while receiving the station.

		Blinks for 5 seconds				Lights for 5 seconds
SP	A	TI.VOL	L	C	R	FM	DIGITAL	AUTO
		MUTE				AM PRO LOGIC S.DIRECT		MEMO
			LFE		SW
RDS	EON	PTY				MHz 3 STEREO	MONITOR	ST.
			LS	S	RS	kHz DOWN MIX	DSP	TUNED
TP	TA	NEWS

	Proceed to step 3 within 5 seconds.
	(If more than 5 seconds elapse, press the MEMORY key again).
	3Use the MULTI CONTROL knob to select one of the station
Operations	presets (1 – 40).
	4Press the MEMORY key again to confirm the setting.
	• Repeat steps 1, 2, 3, and 4to store as many stations as necessary.
	• If you store a station at a previously used preset, the old station will
	be replaced by the new one.
	Receiving preset stations
	Numeric keys
	TUNER
	RC-R0613
	RC-R0720
	1Press TUNER to select tuner as the source.
	2Enter the number of the preset station you want to receive
	(up to “40”).

Press the numeric keys in the following order:

For “15”, press ..........	0,5
For “20”, press ..........	0,0,)

•If you make a mistake entering a two digit number, press the +10 key repeatedly to return to the original display and start again.

								DIGITAL
SP		A	TI.VOL	L	C	R	FM			AUTO
			MUTE	LFE		SW	AM PRO LOGIC S.DIRECT
RDS		EON	PTY				MHz 3 STEREO	MONITOR		ST.
	LS			S	RS	kHz DOWN MIX	DSP	TUNED
TP	TA		NEWS

Listening to radio broadcasts

Receiving preset stations in order (P.CALL)

P.CALL 4/ ¢

TUNER

RC-R0613

RC-R0720

1Press TUNER key to select the tuner as the source.2Use the P.CALL 4/ ¢key to select the desired station.

•Each time you press the key, another preset station is received in order.

Pressing the P.CALL ¢does the following:

Pressing the P.CALL 4does the following:

Holding down the ¢ or 4 key, lets you skip through the presets, receiving each preset station at 0.5 second intervals.