Getting started

Before applying the power

2

Units are designed for operation as follows.

U.K. and Europe ...............................................

AC 230 V only

Australia ...........................................................

AC 240 V only

Russia ...............................................................

AC 220 V only

Preparations

For the United Kingdom

 

 

Amp ASTA-approved (BS1362) fuse.

 

Factory fitted moulded mains plug

 

1. The mains plug contains a fuse. For replacement, use only a 13-

 

2. The fuse cover must be refitted when replacing the fuse in the

 

moulded plug.

 

 

 

3. Do not cut off the mains plug from this equipment. If the plug fitted

 

is not suitable for the power points in your home or the cable is too

 

short to reach a power point, then obtain an appropriate safety

 

approved extension lead or adapter, or consult your dealer.

 

If nonetheless the mains plug is cut off, remove the fuse and

 

dispose of the plug immediately, to avoid a possible shock hazard

 

by inadvertent connection to the mains supply.

 

 

IMPORTANT

 

The wires in the mains lead are coloured in accordance with the

 

following code:

Blue

: Neutral

 

 

Brown

: Live

 

Do not connect those leads to the earth terminal of a three-pin

 

plug.

 

 

 

 

 

 

Caution : Read this page carefully to ensure safe operation.

KRF-V8010D (En/T)

Unpacking

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.

Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.

We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.

Accessories

FM indoor antenna (1)

AM loop antenna (1)

Loop antenna stand (1)

Remote control unit (1)

Batteries (R03/AAA) (4)

Safety precautions

WARNING :

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS- TURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PER- SONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Cleaning

Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth.

Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic components.