Normal playback

 

Recording

 

 

 

KRF-V8010D (En/T)

Recording audio

Muting the sound

17

MONITOR

MUTE lets you mute the sound of the speakers.

Press the MUTE key.

SP A

L

 

MUTE

R

SW

C

Blinks

To cancel

Press the MUTE key again so that the “MUTE” indicator goes off.

• Muting can also be cancelled by adjusting the volume.

INPUT SELECTOR

Recording a music source

1Use the input selector to select the source (other than “TAPE”) you want to record.

SOURCE DIRECT playback (analog sources only)

Use this function to pass the source material direct to the amplifier, bypassing any audio processing.

Press the SOURCE DIRECT key.

2Set the cassette deck to record.

3Start playback, then start recording.

 

S.DIRECT

 

Copying tapes

 

 

 

 

 

 

 

 

 

 

 

 

MONITOR = TAPE copying

 

 

 

 

 

 

 

 

1 Press the MONITOR key.

 

 

 

 

• Either press the LISTEN MODE, SOUND, and SETUP keys, or

 

 

 

 

 

switch to another input source to cancel SOURCE DIRECT play-

 

STEREO MONITOR

 

back.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operations

To cancel

Press again.

•If SOURCE DIRECT playback was activated when using a sur- round mode, cancelling it reactivates the previous surround mode.

Listening with headphones

1Press the SPEAKERS A or B key so that the speaker indicator goes off.

Make sure the SPEAKERS indicators are turned off.

2Use the input selector to select a source other than “TAPE.”

3Start playback on the cassette deck connected to the MONITOR jacks and start recording on the cassette deck connected to the MD/TAPE jacks.

TAPE = MONITOR copying

1Use the input selector to select “TAPE.”

2Start playback on the cassette deck connected to the MD/TAPE jacks and start recording on the cassette deck connected to the MONITOR jacks.

SP A

C

• To copy tapes using a double cassette deck, refer to the instruc-

 

 

 

tion manual of the double cassette deck.

•If you turn off all of the speakers when in the surround mode, the mode is cancelled as well, resulting in stereo playback.

2Connect headphones to the PHONES jack.

PHONES

3Use the VOLUME CONTROL (VOLUME) to adjust the volume.

To adjust the balance

Use the test tone feature.

$- 3

MONITOR function (analog sources only)

You can connect a cassette deck or graphic equalizer to the MONITOR jacks of the receiver. If a graphic equalizer is connected, the MONITOR key should be left in the on position. Alternately, if a cassette deck equipped with a 3-head system is connected to the MONITOR jacks, you will be able to monitor the just-recorded signal while making recordings on the cassette deck. By switching the MONITOR key on and off, you can compare the sound of the source signal and the just-recorded signal. For more information, refer to the instruction manual of the connected component.

Recording video

1Use the input selector to select the video source (other than “VIDEO1”) you want to record.

2Set the video deck connected to VIDEO 1 to record.

3Start playback, then start recording.