Convenient functions

DISPLAY

MULTI CONTROL

SOUND

TUNING/SKIP VOLUME

SUBWOOFER SOUND

Adjusting the sound

You can make further adjustments to the sound while listening to playback in the surround mode.

1Press the SOUND key to select the item you want to adjust.

Each press switches the selection as listed below.

Note that some items are not displayed in certain modes.

BASS (low frequency range sound quality adjustment)

^

TREB (high frequency range sound quality adjustment)

^

Cch (center speaker level adjustment)

 

RS (right surround speaker level adjustment)

 

LS (left surround speaker level adjustment)

 

SW (subwoofer level adjustment)

 

INPUT (input level adjustment)

%

NIGHT (midnight mode on/off)

°

2Use the MULTI CONTROL (TUNING/SKIP) to adjust the setting as desired.

•The adjustment item is displayed for approximately eight sec- onds.

•If you used the remote control to perform the above setting, press the VIDEO key at this point to turn off the remote control’s own adjustment mode. In this case, the input source is not switched.

Ambience effects

KRF-V8010D (En/T)

25

Midnight mode (Dolby Digital (AC-3) mode only)

When watching movies at night you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified parts of the Dolby Digital (AC-3) sound track (like scenes with sudden increases in volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track, even when listening at low volumes.

1Press the SOUND key several times until “NIGHT” is displayed.

•This can be selected only if VIDEO2 or VIDEO3 is selected as the source and the input mode is set to digital.

2Use the MULTI CONTROL (TUNING/SKIP) to select the on or off setting.

 

 

 

NIGHTO N

TUNED

SP A B

L

C R

AUTO SOUND DIGITAL AUTO

 

LFE

 

 

MEMO.

 

 

 

ST.

 

LS

RS

 

 

 

 

•The adjustment item is displayed for approximately eight sec- onds.

•Some Dolby Digital (AC-3) software may not be compatible with the Midnight mode.

•If you used the remote control to perform the above setting, press the VIDEO key at this point to turn off the remote control’s own adjustment mode. In this case, the input source is not switched.

 

 

Operations

control.

SUBWOOFER adjustment

 

It is easy to adjust the volume of the subwoofer using the remote

 

1Press the SUBWOOFER key so that “SW” is displayed.

 

 

 

sW )dB

TUNED

SP A B

L

C R

 

AUTO SOUND DIGITAL AUTO

 

LFE

 

 

MEMO.

 

 

 

ST.

 

LS

RS

 

 

 

 

2Use the VOLUME key to adjust the volume.

• The adjustable range is -10 dB to +10 dB.

Display dimmer adjustent

The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music.

Each time you hold down the DISPLAY key for more than two seconds, the display brightness changes among the three available settings. Select the brightness level you find most pleas- ing.

SP A B

L C R

VIDEO1

PRO LOGIC

 

SW

 

 

S

 

 

SP A B

L C R

VIDEO1

PRO LOGIC

 

SW

 

 

S

 

 

SP A B

L C R

VIDEO1

PRO LOGIC

 

SW

 

 

S

 

 

Note

To enjoy Dolby Digital (AC-3) surround (as well as all the other listening modes) from a single component, be sure to use a Dolby Digital (AC-3) compatible source component. Connect the Dolby Digital (AC-3) compatible source component's Dolby Digital (AC-3) format digital audio signal to one of the DIGITAL INPUT jacks on the back of the receiver. Connect the normal audio signal correctly to the

respective component's AUDIO jacks.

78