Speaker setting flow

The detailed settings below allow you to enjoy full performance of the receiver according to the environment of your listening room.

Speaker settings consist of 4 elements.

Speaker Setup ("SP SETUP") )

Select whether each speaker channel is used or, if used, its size.

The Easy Setup function also allows you to make speaker settings easier.

See <Speaker setup (Easy Setup)> *

Getting into the setup mode

The setup procedure is identical for all of the setting elements. Once you remember the following procedure, you can easily set up other setting elements.

SETUP MULTI CONTROL

Test Tone ("TEST TONE") )

Select the output level from each speaker.

Distance ("DISTANCE") ¡

Select the distance between each speaker and the listening position.

Low Frequency Effects Level ("LFE LVL") ¡

Select the level of bass audio enhancement.

Low Frequency Effect channel delivers separate non-directional bass signals to the subwoofer for more dynamic deep bass sound effects.

Speaker settings completed!

SETUP

MULTI CONTROL /O

œPress [SETUP] to enter the setup mode.

∑Use [MULTI CONTROL 5/∞] to select the element to setup.

Display

Selection

"SP SETUP"

Speaker setup

"TEST TONE"

Test tone

"DISTANCE"

Distance

"LFE LVL"

Low frequency effects level

"EXIT"

Exit the setup mode.

éPress [SETUP] to get into the setup mode of the selected element.

To exit the setup mode

Select "EXIT" in the step ∑and press [SETUP].

English 19