Before applying power

Caution : Read this page carefully to ensure safe operation.

Units are designed for operation as follows.

 

Australia......................................................................................

AC 240 V only

Europe .........................................................................................

AC 230 V only

Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems)

Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste by products.

Contact your local authority for details in locating a recycle facility nearest to you.

Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

Safety precautions

WARNING :

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT’ S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Unpacking

Unpack the unit carefully and make sure that all the accessories are present.

FM indoor antenna (1)

AM loop antenna (1)

Remote control unit (1)

Batteries (R03) (2)

RC-R0732

 

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

Notes on instructions

The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When the same operation is also available on the main unit, the operating method is indicated in illustrations.

The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT SELECTOR] knobs on the main unit are operated by turning the knobs clockwise or counterclockwise.

Example:
Getting into the setup mode

The setup procedure is identical for all of the setting elements. Once you remember the following procedure, you can easily set up other setting elements.

 

 

The knob on the main unit

 

 

is pointed with an arrow to

 

 

indicate that it can be turned in

SETUP MULTI

either direction.

 

 

 

The operating

 

 

 

procedures refer to

 

 

 

those of the remote

 

SETUP

control unit. Some

 

MULTI CONTROL

operations are also

 

/O

 

available using the key

 

 

 

(or knob) of the same

 

 

 

name on the main unit.

œ Press [SETUP] to

 

 

∑ Use [MULTI CONTROL 5/∞]

the element to

setup.

 

 

 

Display

Selection

 

 

"SP SETUP"

Speaker setup

 

 

"TEST TONE"

Test tone

 

 

"DISTANCE"

Distance

 

 

"LFE LVL"

Low frequency effects level

 

 

"EXIT"

Exit the setup mode.

 

Options to be

 

 

 

é Press [SETUP] to get into the setup mode of the

selected are listed

selected element.

in a table.

2 English