Specifications
Rated output power during STEREO operation
...........................................................................100 W + 100 W | |
...........................................................................100 W + 100 W | |
Effective output power during STEREO operation | |
RMS (1 kHz, 10% T.H.D., at 6 Ω) ......................... | 120 W + 120 W |
Effective power output during SURROUND operation | |
FRONT |
|
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven).. | 100 W + 100 W |
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven)... | 120 W + 120 W |
CENTER |
|
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) | ..............100 W |
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ............... | 120 W |
SURROUND |
|
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)100 W + 100 W (1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
SURROUND BACK |
| |
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) | .. 100 W + 100 W | |
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven)... | 120 W + 120 W | |
Total harmonic distortion |
|
|
0.02 % (1 kHz, 50 W, 6 Ω) | ||
0.05 % (1 kHz, 50 W, 6 Ω) | ||
Frequency response (IHF’66) |
|
|
20 Hz – 80 kHz, +0 dB – | ||
20 Hz – 70 kHz, +0 dB – | ||
Signal to noise ratio (IHF’66) |
|
|
CD/DVD.............................................................................. | 100 dB | |
Input sensitivity / impedance |
|
|
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... | 550 mV / 40 kΩ | |
AV AUX ................................................................ | 550 mV / 50 kΩ | |
DVD/6CH INPUT ................................................. | 550 mV / 27 kΩ | |
Output level / impedance |
|
|
REC OUT (MD/TAPE, VIDEO 1)........................... | 550 mV / 470 Ω | |
PRE OUT (SURROUND BACK) | ||
................................................................................. | 0.9 V / 2.2 kΩ | |
PRE OUT (SUBWOOFER) ........................................ | 1.5 V / 1.5 kΩ | |
Tone control |
|
|
BASS ............................................................... | ±10 dB (at 100 Hz) | |
TREBLE ........................................................... | ±10 dB (at 10 kHz) |
Sampling frequency ............... | 32 kHz, 44.1 kHz, 48 kHz, 96 kHz |
Input level / wave length |
|
Optical ......................... | |
Input level / impedance |
|
Coaxial............................................................... | 0.5 |
VIDEO inputs / impedance |
|
|
Composite ............................................................ | 1 | |
VIDEO outputs / impedance |
|
|
Composite ............................................................ | 1 | |
|
| |
1 | ||
0.286 | ||
|
| |
1 | ||
0.286 | ||
COMPONENT VIDEO inputs/ impedance |
|
|
1 | Ω | |
CB/ | 0.7 | Ω |
COMPONENT VIDEO outputs/ impedance |
|
|
1 | Ω | |
CB/ | 0.7 | Ω |
Tuning frequency range | .......................... | 87.5 MHz – 108.0 MHz | |
Usable sensitivity (DIN at 75 Ω) |
| ||
MONO .................. | 1.3 | μV / 13.2 dBf (40 kHz DEV., S/N 26 dB) | |
STEREO ................. | 45 | μV / 42.1 dBf (46 kHz DEV., S/N 46 dB) | |
Total harmonic distortion (DIN at 1 kHz) |
| ||
MONO .................................................... |
| 0.2% (71.2 dBf input) | |
STEREO .................................................. |
| 0.8% (71.2 dBf input) | |
Signal to noise ratio (DIN weighted at 1 kHz) | |||
MONO ............................ | 65 dB (40 kHz DEV., 71.2 dBf input) | ||
STEREO ........................... | 60 dB (46 kHz DEV., 71.2 dBf input) | ||
Stereo separation (DIN 1 kHz) ............................................ | 36 dB | ||
Selectivity (DIN ±300 kHz) ................................................. | 64 dB | ||
Frequency response (30 Hz – 15 kHz) .............. | +0.5 dB, |
Tuning frequency range............................. 531 kHz – 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB).... 16 μV / (600 μV/m)
Signal to noise ratio (30% mod.) .... 50 dB (60 dBμV EMF input)
USB sectionUsable USB device ................................ | USB Mass Storage Class |
Interface ................................... | USB 1.1 (Full speed) compatible |
Maxmum current drain ................................................... | 500 mA |
Power consumption |
|
240 W | |
250 W | |
Standby power consumption ............................. | less than 0.6 W |
AC Outlet SWITCHED |
|
Australia ..................................................... | 1 (total 90W max.) |
Other countries.......................................... | 2 (total 90W max.) |
Dimensions ............................................... | W: 440 mm |
.................................................................... | H: 159 mm |
............................................................... | D: 345 mm |
Weight (net) |
|
9.6 kg (21.2 lb) | |
8.3 kg (18.3 lb) |
Notes:
1.Kenwood follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
Model
Serial Number
44 English