Notes:

•Depending on the type of the signal or speaker setting, some listen modes cannot be selected.

•When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital.

•To enjoy Dolby Digital surround (as well as all the other listen modes) from a single component, be sure to use a Dolby Digital compatible source component.

•Dolby Digital or DTS signal having more channels than the maximum number of playback channels available using this unit’s current settings is input, downmixing is performed to match the number of available channels.

•Some Dolby Digital Surround EX compliant discs do not contain identification signals. For this reason, the receiver may not detect these discs as Dolby Digital EX when the input mode is set to "F- AUTO". In this case, set the listen mode to "DOLBY DIGITAL EX".

96kHz LPCM playback

This unit is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to "STEREO".

•In "F-AUTO" input mode, the listen mode will automatically be

STEREO.

•When in "D-MANUAL" input mode (listen mode is not STEREO), "FS 96kHz" will appear in the display and no sound can be heard from the speakers.

Press [LISTEN MODE] (the listen mode changes to the "STEREO" mode) to output sound from the speakers.

DVD 6-channel playback

Using a DVD player or the like equipped with six (5.1) output channels and this unit, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.

INPUT SELECTOR

INPUT MODE VOLUME CONTROL

VOLUME /o

DVD/6CH

Preparations

•Connect your DVD player to the DVD/6CH INPUT jacks of this unit.

•Turn on all other components that will be used.

•Complete <Speaker settings>.

œSelect "DVD/6CH" as the input source.

∑Press [INPUT MODE] to select "6CH INPT".

éStart playback of a DVD disc.

®Adjust the volume.

Notes:

•It is not possible to adjust the speaker level or sound effect ([SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] will not be functional) of the channels separately when this unit is in the 6CH INPUT mode. Adjust the speaker level with the controls of the DVD player. Refer to the Instruction manual of the DVD players for the detailed operating instructions.

•For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer’s own volume control.

English 31