Storing broadcast stations in memory
10
The automatic memory function allows you to store up to 40 stations using only one button.
The manual preset function allows you to store stations one at a time.
Use the automatic memory function first.
The figure shows an example for the
HIGHBLEND |
| TUNING/MULTI CONTROL | ||||
|
|
|
| WIDE |
|
|
ACTIVE |
|
|
| NARROW |
|
|
IF BAND | RF ATT | ANT A/B |
|
| R D S | |
RECEPTION | RFATT |
| EON | |||
|
|
|
|
| BAND | |
| PTY/ | DISPLAY | MEMORY |
|
|
|
TA/NEWS | PTY SCARCH | TUNING MODE | +10/CLEAR |
| ||
|
|
|
| P. CALL | ||
ON/STANDBY
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 0/CHARA. | DOWN | UP |
: Keys or controls to be used in this operation.
AUTO MEMORY (Storing stations automatically in memory )
The AUTO MEMORY function automatically calls up only those stations which have RDS broadcasts for storing
(up to 40 stations can be stored).
1Switch to FM band.
2Press and hold the MEMORY key (for more than 2 seconds).
MEMORY
The tuner completes the scanning of frequencies in 5 minutes. While scanning, "AUTO" and "MEMORY" are displayed in turn.
÷Unless stations are stored with the automatic memory function, EON reservation and PTY search will not work.
÷AR will not work when the automatic memory function is on.
÷Broadcast stations stored manually may be overwritten.
÷Stations already stored in the preset memory may be replaced by RDS stations. (i.e., If the RDS AUTO MEMORY function finds 15 RDS sta- tions, the stations currently preset at numbers 01- 15 are replaced by the RDS stations.)
÷If the antenna is replaced, you will have to reset the automatic memory function.
÷Stored stations may be erased from the memory.
MANUAL PRESET(Storing stations one at a time)
1Tune in the station to be preset
2Press the MEMORY key
MEMORY
If you press the MEMORY key when the preset number displayed is "-
Perform the operations in the five seconds that the display is blinking.
Lights (for 5 sec.)
STANDBY AR | 0 1 | MEMO ANT A B STEREO |
| 8 9 ) ) kHz | |
AM |
| TUNED |
|
| AUTO |
FM |
| MHz |
(If more than 5 sec. have elapsed, press the MEMORY key again.)
3Select one of the preset numbers from 1 to 40.
1Turn the TUNING/MULTI CONTROL knob.
TUNING/MULTI CONTROL
DOWN | UP |
2Select the desired station.
MEMORY
Instead of steps 1and 2, you can use the numeric keys (0~9,+10), to store the broadcast stations.
Press the numeric keys (0 to 9, +10) in the following order.
To select “15”...0,5
To select “20”...0,0, )
| Blinks | Lights (for 5 sec.) |
AR | 1 5 | MEMO ANT A STEREO |
| 9 ). ) ) AUTO | |
|
| TUNED |
FM |
| MHz |
The numbers 1 to 40 appear, in turn, as you turn the knob.
01, 02, 03 38, 39, 40 
÷Repeat steps 1 to 3 for each of the stations to be stored in memory.
÷If a station is stored in a preset number which already stores a station memory under it, the previous memory is replaced by the new memory content.
÷Once the memory content has been preset, it is held for about 3 days even after the power cord is unplugged from the mains outlet.
÷You cannot enter numbers over 40.
÷If you make a mistake when pressing the 0key, press the 0 key several times to return to the original display before
÷The stored station will be erased from the memory.