[
], [
]
Press [
] or [
] to select an operating frequency, Memory channel, Menu number, setting value or to change the scan direction, etc.
The [
]/ [
] keys function in the exact same way as the Tuning control. These keys change frequencies, memory channels, or other selections, depending on the current transceiver mode.
[
OK]
Press [
OK] to move to the next step or to complete the setting in various selection modes such as Function Select or Menu mode.
[ESC 
]
Press [ESC 
] to move back to the previous step or to quit the setting in various selection modes such as Function Select or Menu mode.
[A/B]Press [A/B] to select operation band A or B.
Press [F], [A/B] to select a frequency band.
[MENU]Press [MENU] to enter Menu mode.
Press [F], [MENU] to cycle the transmit output power between: High Power
[F]
Press [F] to enter Function mode.
Press [F] (1s) to turn the transceiver key lock function ON and OFF.
[VFO]Press [VFO] to enter VFO mode, then press [
]/[
] or rotate the Tuning control to select an operating frequency.
Press [F], [VFO] to copy the current Memory channel or Call channel to the VFO (memory shift).
[MR]Press [MR] to enter Memory Channel mode, then press [
]/[
] or rotate the Tuning control to select a Memory channel.
Select a Memory channel, then press [F], [MR] to store the current operating frequency in the Memory channel.
[CALL]Press [CALL] to select the Call channel.
Press [F], [CALL] to store the current operating frequency to the Call channel.
9