BASIC OPERATIONS

6:,7&+,1*7+(32:(5212))

Press the [] (1s) to switch the transceiver ON.

•The power on message momentarily appears on the display.

•If the transceiver power on password has been activated {Menu No.100}, you must first enter your password before you can operate the transceiver.

Press the [] (1s) again to switch the transceiver OFF.

Note: While using APRS, in order to prevent Packet miss-decoding, access Menu No. 110 and set the Battery Saver to “Off” or “0.03”.

$'-867,1*7+(92/80(

Rotate the VOL control to increase the volume and counterclockwise to decrease the volume.

Note:

XSome functions of this transceiver, such as the beep, have their own volume settings. Adjust those settings to your desired values.

XAccess Menu No. 121 to set the volume balance between Band A and B.

14