Problem |
| Probable Cause | Corrective Action | |||||||||||||
Transceiver transmits | VOX function is ON. | Access Menu No. 134 | ||||||||||||||
without pressing [PTT]. |
|
| (VOX) and select “Off”. | |||||||||||||
The transceiver | The Automatic Power | Access Menu No. 111 | ||||||||||||||
switches OFF for no | OFF (APO) function is | (APO) and select your | ||||||||||||||
apparent reason. | ON. | desired time length or “Off”. | ||||||||||||||
The Scan function does | You have selected | Select either “Time” (Time- | ||||||||||||||
not resume scanning | “Seek” for Menu No. | Operated) or “Carrier” | ||||||||||||||
after the transceiver | 150 (Scan Resume). | |||||||||||||||
detects a signal. |
|
| No. 150 (Scan Resume). | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Packet operation | 1 The squelch is open. | 1 Select the correct squelch | ||||||||||||||
results in no connects |
|
| level so that the squelch is | |||||||||||||
with other stations. |
|
| opened only when signals | |||||||||||||
|
|
| are present. |
| ||||||||||||
| 2 You did not select the | 2 Use HBAUD command | ||||||||||||||
|
| same transfer rate as | to select the appropriate | |||||||||||||
|
| the target station. | transfer rate. |
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
When transmitting | You are receiving the | Change your settings to | ||||||||||||||
in full duplex mode, | transmitted signal of | a transmit frequency that | ||||||||||||||
another signal is being | your station. | does not receive the signal, | ||||||||||||||
received at the same |
|
| or change the receive | |||||||||||||
time. |
|
| frequency. |
| ||||||||||||
|
|
| Example frequency setting : | |||||||||||||
|
|
| Transmit frequency of | |||||||||||||
|
|
| 146.000 MHz and receive | |||||||||||||
|
|
| frequency of 439.600 MHz | |||||||||||||
You cannot transmit | 1 | Beacon is OFF. | 1 Press [BCON] to switch | |||||||||||||
any APRS data. |
|
| Beacon ON. |
| ||||||||||||
| 2 The squelch is open. | 2 Select the correct squelch | ||||||||||||||
|
|
| level so that the squelch is | |||||||||||||
|
|
| opened only when signals | |||||||||||||
|
|
| are present. |
| ||||||||||||
| 3 The data band is | 3 If you have blanked the | ||||||||||||||
|
| inactive. | data band, press [A/B] or | |||||||||||||
|
|
| [DUAL] to active it. | |||||||||||||
| 4 The | 4 Press [TNC] to switch ON | ||||||||||||||
|
| OFF. | the TNC. |
| ||||||||||||
| 5 | You selected Packet | 5 Press [TNC] twice so that | |||||||||||||
|
| mode. | only “ |
|
|
|
|
|
|
|
|
|
|
|
| ” appears. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
39