[LIST] (5)

Press [LIST] to display the Station list.

Press [F], [LIST] to display the DX Cluster list <APRS>.

[BCON] (6)

Press [BCON] to enter the Beacon Transmit mode (When TX Beacon method is Manual) or turn the Beacon function ON or OFF (When TX Beacon method is other than Manual) <APRS>.

Press [F], [BCON] to enter the Quick Beacon mode <APRS>.

[REV] (7)

Press [REV] to turn the Reverse function ON or OFF.

Press [REV] (1s) to turn the Automatic Simplex Checker ON.

Press [F], [REV] to enter the Voice Alert function setup mode <APRS>.

[TONE] (8)

Press [TONE] to turn the Tone function ON.

•Each time you press [TONE], the function cycles through the following: Tone ON ° CTCSS ON ° DCS ON ° Cross Tone ON ° OFF.

•Additionally, when APRS is ON and Voice Alert is configured, Voice Alert ON is added to the above cycle.

Press [F], [TONE] to enter the Tone frequency, CTCSS frequency, DCS code, or Cross Tone setup mode.

Press [F], [TONE] (1s) to start the Tone frequency ID, CTCSS frequency ID, or DCS code ID scan.

[PF] (9)

Press [PF] to activate its programmed function. The default function is “Weather Channel” (TH-D72A)/ “Memory Name < > Frequency” (TH-D72E).

[MHz] ()

Press [MHz] to enter the MHz mode.

Press [MHz] (1s) to start the MHz scan.

Press [F], [MHz] to enter Offset Direction setup mode.

•Each time you press [F], [MHz], the offset direction cycles through the following: plus (+) direction ° minus (–) direction ° –7.6 MHz (TH-D72E only) ° OFF.

[DUAL] (0)

Press [DUAL] to switch the Single band mode and Dual band mode. Press [F], [DUAL] to turn the Full duplex function ON or OFF.

[ENT] (#)

Press [ENT] to enter Frequency or Channel number entry mode. Press [F], [ENT] to enter Frequency step setup mode.

11