REVERT CHANNEL
The revert channel is the channel from which you start scanning. So, for example, if you are on channel 1 when you begin to scan, your revert channel is channel 1.
During scan, pressing the PTT switch will automatically select the transceiver’s revert channel (in the above example, channel 1) and you will begin transmitting. However, if you are currently paused on another channel after having received a signal (in the above example, any channel other than channel 1 – such as channel 9), pressing the PTT switch will allow you to transmit on that channel, rather than returning to the revert channel. Scanning will resume after 5 seconds, unless a signal is present on the channel.
15
