PREPARATION
Installing/ Removing the (Optional) Battery Pack
1 Match the guides of the battery pack with the grooves on the upper rear of the transceiver, then firmly press the battery pack in place.
2 Lock the safety catch to | 1 |
prevent accidentally releasing | 2 |
the battery pack.
3 To remove the battery pack, lift the safety catch, press the release latch, then pull the battery pack away from the transceiver.
3
Note:
◆For battery pack charging procedures and useage, refer to the battery charger Instruction Manual.
◆Before charging a battery pack that is attached to the transceiver, ensure that the safety catch is firmly closed.
Installing the (Optional) Antenna
Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure.
Optional antenna