VOX Operation

1 Connect the headset to the transceiver.

2 Press and hold the key programmed as VOX for 2 seconds.

3 To transmit, simply speak into the microphone.

The transceiver recognizes sound levels depending on the VOX Gain level. If it is too sensitive, it will transmit when there is noise in the background. If it is not sensitive enough, it will not pick up your voice when you begin speaking.

4When you finish speaking, transmission ends.

5To turn the VOX function OFF, press and hold the VOX key again, for 2 seconds.

Note: If a speaker/ microphone is connected to the transceiver while VOX is ON, and the VOX Gain Level is set to a sensitive level, louder received signals may cause the transceiver to transmit.

24