Encryption

Note: You must install the Secure Cryptographic Module (SCM) to use the Encryption feature.

Press the key programmed as Encryption, or access the Menu {page 12}, to switch the transceiver to secure (encrypted) transmission.

•Pressing the PTT switch after the Encryption function has been turned ON encrypts the transmitted signal.

Signaling

■Quiet Talk (QT)/ Digital Quiet Talk (DQT)

Your dealer may have programmed QT or DQT signaling on your transceiver channels. A QT tone/ DQT code is a sub-audible tone/code which allows you to ignore (not hear) calls from other parties who are using the same channel.

Operator Selectable Tone (OST)

If a key has been programmed with OST, you can reprogram the QT/DQT settings on each of your channels. 1 Select your desired channel.

2 Press and hold the key programmed as OST for 1 second.

3Press / to select your desired tone or code.

• Your dealer can set up to 40 tones/codes.

4Press to save your new setting.

5When you have finished operating using OST, press the OST key again to turn the OST function OFF.

■Network Access Code (NAC)

Your dealer may have programmed a Network Access Code on your transceiver channels. NAC is a feature of P25 transceivers that functions similar to QT/DQT; squelch will open only when the correct NAC is received.

22