If the Priority channel has been set as Operator Selectable by your dealer, you can reprogram the Priority channels.
1Select your desired zone and channel.
2Press the key programmed as
3Press 
/
to select “NORMAL”, “PRIORITY 1” ( 
), “PRIORITY 2” ( 
), or “PRIORITY 1&2” ( 
).
4Press 
to save the setting.
Scan Revert
The Scan Revert channel is the channel selected when you press the microphone PTT switch to transmit during scan. Your dealer can program one of the following types of Scan Revert channels:
•Selected: The last channel selected before scan.
•Selected + Talkback: Same as “Selected”, plus you can respond to calls on the channel at which scan is paused.
•Priority 1/ Priority 2: The Priority channel (either Priority 1 or Priority 2).
•Priority 1 + Talkback/ Priority2 + Talkback: Same as “Priority 1/ Priority 2”, plus you can respond to calls on the channel at which scan is paused.
•Last Called + Selected: Same as “Selected + Talkback”, plus you can respond on the last channel on which you received a call after scan has resumed.
13