BACKGROUND OPERATIONS

Your dealer can activate a variety of transceiver functions to perform without any additional operation on your part.

Time-out Timer (TOT)

The Time-out Timer is used to prevent you from using a channel for an extended duration. If you continuously transmit for a preset time, the transceiver will stop transmitting and an alert tone will sound. Release the microphone PTT switch.

Signal Strength Indicator

The signal strength indicator displays the strength of received calls.

Strong

Sufficient

Weak

Very weak

No icon appears when no signal is available

Compander

If programmed by your dealer for a channel, the compander will remove excessive noise from transmitted signals, to provide higher clarity of signals.

Busy Channel Lockout (BCL)

If BCL is set up by your dealer, you will be unable to transmit if the channel is already in use. Use a different channel or wait until the channel becomes free.

If BCL Override has been programmed, you can transmit over the current signal:

1Press and hold the microphone PTT switch.

• If the channel is already in use, a warning tone will sound.

2Quickly release and then press the PTT switch again.

3Speak into the transceiver as you would during a normal call.

PTT ID

PTT ID is the transceiver unique ID code which is sent each time the microphone PTT switch is pressed and/or released.

Note: PTT ID can be made only in analog operation.

20