FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

FleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned by Kenwood Corporation.

Note: This function is available only in analog operation.

Selcall (Selective Calling)

A Selcall is a voice call to a station or group of stations.

■Transmitting

1 Select your desired zone and channel.

2 Press the key programmed as Selcall or Selcall + Status to enter Selcall mode.

3 Press / to select the station you want to call.

•If Manual Dialing is enabled, you can directly enter the station ID using the microphone keypad.

4 Press the microphone PTT switch and begin your conversation.

■Receiving

An alert tone will sound and the transceiver will automatically enter Selcall mode. The calling station’s ID will appear when a Selcall is received. You can respond to the call by pressing the microphone PTT switch and speaking into the microphone.

■Identification Codes

An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number. Each transceiver has its own ID.

•Enter a Fleet number (100 ~ 349) to make a group call.

•Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.

•Enter a Fleet number and select “ALL” ID to make a call to all units in the selected fleet (Fleet call).

•Select “ALL” Fleet and enter an ID number to make a call to the selected ID in all fleets (Supervisor call).

•Select “ALL” Fleet and “ALL” ID to make a call to all units (Broadcast call).

Status Message

You can send and receive 2-digit Status messages which may be decided in your talk group. Messages can contain up to 16 alphanumeric characters. Status messages range from 10 to 99 (80 ~ 99 are reserved for special messages).

A maximum of 15 received messages (combined status messages and short messages) can be stored in the stack memory of your transceiver.

14